Owner's Manual

GoldenEar Invisa 600 Manual
Invisa 600 Owner’s Manual
8. Loosen the four rotating lock arms on the speaker by turning the arm screws on the front of the speaker
counterclockwise
1
/2 to 1 turn, just enough to allow the lock arm to move freely (Figure 4).
• Make sure the rotating lock arms are positioned inwards (Figure 5) so that your speaker fits into
your cutout hole.
9. Holding the speaker’s front lip with your thumbs and index fingers, carefully slip the speaker into
the cutout and hold firmly in place. (Figure 6).
Figure 4 Figure 5
Figure 6
10
LOCK ARM SCREWS
TURN COUNTER CLOCKWISE
TO LOOSEN (4 PLACES)
LOCK ARM TUCKED
IN PRIOR TO
INSTALLING
SPEAKER IN
WALL/CEILING