Environmental Technology Food Safety Disinfection Electrostatic Battery Powered ULV Cold Fogger Operation Manual Dear customer: Thank you for choosing our battery ULV cold fogger. Please read the operation manual carefully before use the product, strictly abide by the safety operation rules, in order to prevent product failure from affecting your normal use or cause unnecessary losses.
CONTENTS I Illustrated parts …………………………………………………………………………………….3 II Technical parameters …………………………………………………………………………….4 III Basic working principle …………………………………………………………………………5 IV Operation instructions …………………………………………………………………………..5 V Operation instructions for Replacing Nozzles………………………………………………………………………………………….…6-14 VI Operation instructions for Switches……………………………………………………..14-18 VII Battery operation and maintenance methods……………………………………………..
I 3 Illustrated parts Part# Description Q’ty 1 Nozzle cover 1 2 Spring 1 3 sprayer cover 1 4 Bracket for nozzle 1 5 SF-1,2mm 1 6 SF-1,5mm 1 7 SF-1,8mm 1 8 Valve core-1 1 9 Valve core-2 1 10 Valve core-3 1 11 rectifier 1 12 DC motor 1 13 Motor seal sleeve 1 14 filter 1 15 battery cover 1 16 Side plate-left 1 17 Side plate-right 1 18 Tank cap 1 19 O-ring 1 20 Strap 1 21 Charger 1 22 Battery 1
II Technical parameter parameter #101519 Item# Rated Voltage Battery capacity DC24V 8AH Rated power 240W Spray volume 0.02-0.04gallon/min(adjustable) Droplet size 0.03in.<40μm,0.039in.<60μm,0.06in.>60μm Spray distance(calm wind) 16—26ft. Tank capacity 0.66 gallon Charging time 5h Working time 60min Packing size (LXWXH) 27.9x11.4x7.87in.
III Basic working principle The Battery-Operated ULV Cold Fogger use high-power super speed brushless DC motor, the high speed motor can drive the fan blade to produce high-speed rotary cutting airflow, at the same time, pressurized to the solution tank to make the solution delivery to the micro nozzle according to constant flow rate and high speed air flow, under the common action of high-speed rotary cutting airflow and special structure of nozzle, the liquid is broken into tiny fog particles.
V Operations instructions for replacing the Nozzles: 1. Use a screwdriver to open the four screws of the cover plate. 2. Take out the cover plate and spring. 3.
4. Then you will see the inside nozzle. 5. Take out the nozzle from the cover.
6. Make the nozzle separate from the round ring. 7. Replace with another needed nozzle.
8. Insert the replaced nozzle into the round ring. 9. After done, it will be like as below.
. Install the O-ring. 11. Connect replaced nozzle with the cover as below.
12. The status of nozzle with cover is like below. 13. Cover the nozzle and make it tightened.
14. Install the spring and cover. 15. Tighten 4 related bolts.
16. Please check if there is any water leaking.
VI Operation Instructions for Switches: 1. Open the right side cover plate. 2. Button the switch inside.
3. Close the right side cover plate.
4. Please turn on the working Switch, then it works. 5. When charging, put one side into the charging port, make the other side connected with the plug.
6. Replace the spray liquid by loosening the cover. Inject enough liquid, then cover it by tightening. 7. Install the belts like below.
VII Battery operation and maintenance methods For the convenience of customers use continuously, you can choose spare batteries. The battery can be charged in the machine or charged separately. 1. Notice: The charger indicator light will become red when it is charging and turn green when it is full charged. 2. Charging method (when battery is in machine, the machine must be placed in a safe, dry, normal temperature environment when it is charging.
VIII Common Failures and Trouble Shooting 1. Failures: Motor don’t run Cause (1): The battery capacity is not enough, the battery is in automatic protection when the power light becomes red. solution:Check if the battery is adequate. Cause :(2) The range button not settled. Solution: adjust it to zero Cause: (3) Overload operation Solution: Stop working and put the machine at a ventilated place for 30minutes. 2.
VIIII Attentions 1. Please make sure the battery capacity is enough before use. Please charge it when the light becomes red. 2. If the water goes into the machine, make sure it completely dry before turn on the switch. 3. The operating ambient temperature of the machine is between 0~40℃. It should not be knocked with heavy object, avoid falling from high place. The customer must use special battery configured by this product. It is forbidden to use other types of batteries to avoid damage to the product. 4.
VIIIII Warranty Service 1. We provide one year free maintenance for the main components of the equipment. List of major components: 1) Motor 2) Electronic control board 3) Battery (warranty for liquid leakage, plastic shell cracking, etc. Except for human factors and external damage) 4) Charger 5) Water tank 6) Single Valve 7) Nozzle Parts that are not in the main components list are all warranted for 3 months (except for human factors, external damage and improper use) 2.
VIIIIII Packing List NO. Item Specification QTY 1 Battery operated fogger 2 Charger 3 Screwdriver 1 4 Straps 1 5 Filter sponge 1 Remarks 1 DC24V 1.8A 1 0.8mm<40μm 6 Nozzles 0.8/1.0/1.5mm 1 1.0mm<60μm 1.5mm>60μm 7 Sealing ring 8 User Manual 1 9 Product certification 1 23 8.5*1.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Goldenbleu product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 6 months from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
rules pertaining to conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction for any disputes relating to this warranty.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.