Operation Manual

21
channels), scan type (means preset scan,
that is searching the existed TP. Automatic
Scan means blind scan. It is no need
existed TP info) and NIT Search on/off.
After you set up, press [OK] key to start
scanning.
2 Press [White] key into the blind scanning
immediately.
10.1.11 Multi Search
1 Multi Search can support search the multi
satellite one by one as user select .
2 Press [Red] key, it will show up a dialog to
ask you scan, program type, scan type and
NIT Search on/off. After you set up, press
[OK] key to start scanning.
10.2 Terrestrial Installation
Press [OK] key to enter the selected item.
1. You can select the Bandwidth according different
country.
2. You can set the Tuner Power ON/OFF.
3. Press [OK] key on Terrestrial Installation item to
enter the following menu.
 Scan Mode.
1 There are two modes. You can scan channel by
channel or by frequency”.
2 When scan band is UHF and region is “France”,
the range of Ch No. is from 21 to 69. When scan
band is VHF and region is “France”, the range of
Ch No. is from 1 to 9. (it’s according to region)
3 When you complete your modification, press [red]
key enter scan menu and then press [OK] key,
then it will begin to scan.
4 Press [Exit] key to exit the scanning.