Manualshelf

Owner Manual

ManualsBrandsGolden Designs ManualsHot Tubs & SaunasCopenhagen 3 - Person Indoor Bluetooth Compatible Traditional Steam Sauna in Cedar
11121314151617181920
17
G. Installing the BACKREST ON WALL PANELS
1. Now it is time to install the BACKREST ON REAR WALL PANEL. In addition, you
will need to connect the wire connection from the REAR WALL PANEL to the wire
connection on the BACKREST ON THE REAR WALL PANEL. After connected,
tuck the wires behind the BACKREST. Use the provided screws to screw into
place. (see Figure 14 & 15) Also, you will need to connect the wire connection
from the RIGHT REAR CORNER to the wire connection on the BACKREST ON
THE RIGHT SIDE WALL PANEL (for GDI-7389-01 & GDI-7689-01). After
connected, tuck the wires behind the BACKREST. Use the provided screws to
screw into place. (see Figure 14, 15, & 16) Please note that the FAN SHAPED
BENCH has not yet been installed as seen in Figure 16. It will be installed in
Section H, Part 2.)
Rear Wall – Middle Light Connection Rear Right – Corner Light Connection
Figure 14
Figure 15