Installation Guide

ManualsBrandsGoldberg Brothers Inc. ManualsBuilding materials1-1/2 in. x 10-3/4 in. x 48 in. Steel Economy Horseshoe Barn Door Hardware Set Moulding Silver Metallic

1

Oponal Accessories

Side Wall Guide Bracket

1 each

Includes 1 bracket,

4 machined screws and 1 felt pad

Part #6001SW-*

NOTE: Use the

provided T-guide

screws for

side wall guide

installaon

Door Guide “U”

1 set

Includes 2 “U” guides, 2 machined

screws and 1 felt pad

Part #6001U-*

NOTE: Use the provided

T-guide screws for U-guide

installaon

Track Connecng Pla te

1 each

Part #6008C-*

Wall Extension Bolts Set

Includes 6 lag bolts and 6 wall spacers

So Stop

1set

Includes 2 So Stop mechanisms,

2 triggers and 4 machined screws

Part #6008-11 (4’-7’ track)

Part #6008-17 (8’ track)

* Indicates that the related part is available is various colors

Lift the door and

hang

it from the track.

Using the

remaining hex lag

bolts, spacers and

washers, ﬁnish

attaching the track

at the remaining

connecting points.

Using a hex lag bolt, track

stop, spacer and washer,

connect one end of the

track to the wall using the

pre-drilled hole closest to

the opening as shown in

the diagram.

NOTE:

The end of the track

should extend a minimum

of ⁄ʺ past the door

opening as noted above.

½ʺ

DH + 1

1

⁄

2

ʺ = Track centerline

Mark the centerline* of the

track on the wall using a level.

*The centerline of the Track is

represented

as the door

height (DH) + 1

1

⁄

2

ʺ above

ﬁnished ﬂoor.

At each of the track

connecting points, drill

3

⁄

16

ʺ

pilot holes.

FINISHED FLOOR

Track Installaon

Goldberg Brothers, Inc.

10488 W Cenntenial Rd, Suite 100

Lilet on, CO 80127

(303) 321-1099

Track Centerline

1⁄ʺ Door

1⁄ʺ Door

2⁄ʺ Door

⁄ʺ Extension

Part #60013E-*

Part #60013EX-*

Part #60013EXX-*

⁄ʺ Extension

Part #60014E-*

Part #60014EX-*

Part #60014EXX-*

1⁄ʺ Extension

Part #60015E-*

Part #60015EX-*

Part #60015EXX-*

Sidewall Guide Bracket

1 each

Includes 1 bracket,

4 machine screws, 4 nuts and 1 felt pad

Part #6001SW-*

NOTE: Use the

provided T-guide

wood screws for

sidewall guide

installation.

Door Guide “U”

1 set

Includes 2 “U” guides, 2 wood screws

and 1 felt pad

Part #6001U-*

NOTE: Use the provided

T-guide wood screws for U-guide

installaon.

Track Connecting Plate

1 each

Part #6008C-*

MP Soft Stop

1 set

Includes 2 Soft Stop mechanisms,

2 triggers and 4 wood screws

Part #6008SOFT11 (4’-7’ track)

Part #6008SOFT17 (8’+ track)

* Indicates that the related part is available in various colors.

Goldberg Brothers, Inc.

10488 W Centennial Rd, Suite 100

Littleton, CO 80127

(303) 321-1099

Swing the track

to the opposite

end of the wall

as shown.

Using the

same method

as before, connect

the opposite end of

the track to the wall.