Instruction Manual

Main Body x1
Wi ng Nut x 4
Wheel Castor x2
Assembly
U-s hape Bolt x 2
Carefull y turn the Main Body upside-down on
a scra tch-free and stable surfa ce. Be ca reful to
prevent damage to the paint finish or your
fl oor surfacing(Fig.1).
Fi t the wheel assemblies onto the Main Body
by pla cing the U-shaped bolts between the
outermost fins on each side of the Main Body
(see Fig.2 - 4).
Securel y fasten the wheel assemblies onto the
Main Body by screwing the wing nuts onto the
U-s haped bolts (see Fig. 5).
IMPORTANT: Please fit the
wheel assemblies as per the diagram.
Any other position may affect the
stability of the heater.
WARNING: Operate the Main
Body in normal upright position only
with wheel assemblies attached to
the bottom, any other position could
create a hazardous situation.