Operating Instructions 40cm Pedestal Fan with Remote Model: GCPF160
General Care and Safety Guide Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
General Care and Safety Guide 20. Never place appliance close to radiant heat source. 21. Never operate in areas where petrol, paint or other flammable liquids are used or stored. 22. Never use the appliance to dry clothes. 23. Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance. 24. Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only.
Components 1.Grill nameplate 2.Front Grill 3.Blade lock 4.Blade 5.Grill lock 6.Back grill 7.Motor shaft 8.Motor front Housing 9.Motor back housing/ Oscillation bar 10.Motor neck 11.Fan front body 12.Fan back body 13.Decoration panel 14.Switch 15.Fan Body Retaining Nut 16.Outer stand pole 17.Inner stand pole 18.Height adjustment lock 19.Base cover 20.Cross base 21.
Assembly WARNING: The fan should not be connected to the power mains during assembly A B C D E F G Direction of rotation Height adjustment lock Base cover Outer stand pole 4 screws Base Feet Caps • Place the Base Feet (F) together so they form the Cross Base and place the Outer stand pole (D) upon the Base feet and fix it with the 4 screws (E) provided. • Loosen and remove the height adjustment lock (B) and place the base cover (C) over the Outer stand pole (D).
Assembly WARNING: The fan should not be connected to the power mains during assembly Assembly of switch compartment, motor and grill • Loosen the fan body retaining nut (15) and place the fan body on to the inner stand pole (17). Tighten the fan body retaining nut (15) to secure in place. • Unscrew the blade lock (3) from the motor shaft (7) by rotating it clockwise. • Unscrew the grill lock (5) by rotating it anti-clockwise.
Operating your Fan Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This appliance requires no installation, it should be used solely as a portable appliance. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance. Place the fan on a dry, level and sturdy surface. Check that the fan control switch is set to the off position before plugging into the mains supply.
Cleaning The fan requires regular cleaning to ensure trouble free operation. Ensure that the fan is switched off from the supply mains before removing the guard. Unplug the fan from the mains supply before cleaning. Use a damp cloth (not wet) to wipe the exterior of the fan to remove dust and dirt. Use a vacuum cleaner to remove dust and fluff from around the grills. Ensure the fan is dry before plugging back into the mains supply. Do not attempt to dismantle the fan. There are no user serviceable parts.
One Year Warranty Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of one year. In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.
