Instruction Manual

WARNING: keep all objects at least 1 metre from the front, sides and rear
of the appliance.
For best operating performance position the appliance in a location that will create a
“flow through” air effect. The greatest cooling effect will be felt if the appliance is
operated in a partly opened doorway or window with the “cool” conditioned air
directed into the room to be cooled.
It is important to also have a door or window partly opened away from the cooler to
create this “flow through” effect.
On days of high humidity, the cooling effect may be reduced as the air entering the
filter may already be saturated with moisture. On days like this it may be better to
switch the cooling feature OFF and operate the appliance as a fan only.
Filling water tank
Ensure that the cap on the water drainage outlet of the appliance is tight.
Pour clean cold water into the water filler area on the top of the appliance, observing
the water level indicator in the bottom front panel.
CAUTION: do not spill or allow water to come in contact with the control
panel.
Do not overfill past the MAX water indicator mark. If desired, place ice in the ice tank
in the top of the appliance.
Do not pour water into the ice tank.
Do not allow the combined use of water and ice to overfill the water reservoir.
When moving the appliance, do so with extreme caution, so as not to spill any water in
the reservoir. The appliance should be moved slowly and in a sideways direction.
Always keep the appliance upright.
Place the fan on a dry, level and sturdy surface.
Check that the fan control switch is set to the off position before plugging into the
mains supply.
The appliance ON/OFF LED for the power will light to indicate that there is power to
the appliance.
Always choose a safe location for the appliance, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the appliance before use. This
appliance requires no installation, it should be used solely as a portable appliance.
Operating your Fan