Owners Manual

ManualsBrandsGold Note ManualsAccessoriesExternal Power Supply

| TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

The LED on the front

panel is OFF.

The system is noisy.

| The POWER CORD is

damaged or not plugged

in.

| Ensure that the POWER

CORD is not damaged

and connect it properly to

the power outlet and the

AC plug on PSU-10/PSU-

10 EVO.

| The MASTER SWITCH is

OFF.

| The PSU-10/PSU-10 EVO

is not correctly placed.

| The PSU CONNECTION

CABLE is not connected

properly.

The PH-10 is not showing

the icon that indicates the

PSU-10 is connected.

The DS-10 LED does not

light up when powered by

the PSU-10 EVO.

| Turn ON the MASTER

SWITCH on the rear panel

of PSU-10/PSU-10 EVO.

| Ensure that the PSU-10/

PSU-10 EVO is placed

to the LEFT HAND

SIDE of the master unit

and possibly at some

distance.

| Ensure that the PSU

CONNECTION CABLE

is not damaged and

connect it properly to

the PSU OUT port on the

PSU-10/PSU-10 EVO and

to the PSU port on the

master unit.

CLEANING THE UNIT

With EXTREME care use ONLY water or detergents for delicate surfaces with a very soft

cloth to sweep dust and remove stains.

Any acid or not extremely soft cloth will irreversibly damage the unit ne aesthetic. Do not

use alcohol.