Owners Manual

1 Turn OFF the unit and remove the power

cord.

2 Connect the external PSU to the power

outlet using the supplied power cord.

INSTALLING THE PSU-10

AND PSU-10 EVO

For the best performance, we suggest to

place the PSU on the lefthand side with

around 10/20cm of space between the units.

Please avoid stacking the units on top of

each other if possible.

| QUICK START

3 Connect the external PSU to the unit

using the supplied cable (from PSU OUT

to the PSU connector of the unit).

4 Turn on the MASTER SWITCH on the rear

panel of the external PSU.

Installing the PSU-10/PSU-10 EVO is simple and takes only a few quick steps:

DS-10

PH-10

PSU-10 EVO

PSU-10