Owners Manual

INSTALLATION

STEP 1

Insert the tonearm into the arm collar on the turntable and block it with the hex-bolts on the collar while adjusting the

VTA (requires the cartridge to be already installed).

Insert the Phono Cable into the arm collar of the turntable as suggested in the picture. Insert the arm into the base and

then proceed to screw the 3 grains arranged on the external circumference at intervals of 120 °.

STEP 2

Connect the Phono Cable to the tonearm.

To align the female DIN connector of the tonearm to the male

DIN connector of the cable correctly refer to the ground slot.