Owners Manual

STEP 1
Place the column vertically on a soft cloth.
Turn the base upside down and place it
over the topside of the column aligning the
central holes on the base with those on the
column. Insert the M4x35 screws into the
four central holes and rmly tighten them to
join the base to the column.
STEP 2
Insert the spike feet into the four holes on
the base as shown into picture 2, tighten
them rmly to lock them in place.
STEP 3
Turn the assembly upside down to place the
base on the ground ensuring the spike feet
sit on the spike pads to prevent damages to
the oor. Place the shelf on the column, the
Gold Note logo should be facing upwards
and marks the front-facing side of the stand.
Insert the M4x20 screws into the four holes
and rmly tighten them to join the shelf to
the column.
STEP 4
Use the shelf caps to cover the head of the
screws.
IMPORTANT
Please pay attention to the screws and
ensure you are using the correct type for
each step.
| ASSEMBLING THE STAND
3
M4x35mm
screws
M4x20mm
screws
Picture 2
Shelf caps
Base
Spike feet
Base
Column
Shelf