Gold Bond® BRAND 09 29 00/NGC Gold Bond® Boards / Plaster Veneer Plaster and Conventional Plaster Whether your commercial or residential project requires a veneer or conventional plaster system, you will find the perfect match in our family of Gold Bond® brand products. Choose from among our outstanding options: five veneer plaster and five conventional plaster products featured in this section.
09 26 13/NGC Gold Bond® BRAND Veneer Plaster Products Gold Bond® brand Uni-Kal® Veneer Plaster DESCRIPTION Gold Bond® brand Uni-Kal® Smooth Finish Veneer Plaster is a mill-mixed veneer finish plaster for smooth and textured troweled applications. It consists of specially ground, calcined gypsum, requiring the addition of water. Texturing grade silica sand may be added for textured finish. Complies with ASTM C587. APPLICATIONS Use as a single-coat application over gypsum plaster base.
09 26 29 13/NGC 00/NGC Gold Bond® brand Kal-Kote® Basecoat Veneer Plaster DESCRIPTION Gold Bond® brand Kal-Kote® Basecoat Plaster is a specially designed high strength basecoat plaster for application 1/16" (1.6 mm) minimum thickness over Kal-Kore® Plaster Base, masonry or monolithic concrete that has been treated with a bonding agent. Strength of Kal-Kote® Basecoat is substantially greater than that exhibited by typical sanded basecoat plaster.
09 26 13/NGC Gold Bond® BRAND Veneer Plaster Products Gold Bond® brand Kal-Kote® Texture Finish Plaster DESCRIPTION Gold Bond® brand Kal-Kote® Texture Finish Plaster is a mill-mixed finish plaster for textured applications. It consists of specially ground, calcined gypsum and aggregate, requiring the addition of water. Complies with ASTM C587. APPLICATIONS A finish coat of Kal-Kote® Texture Finish Plaster is intended for interior textured application over a gypsum plaster basecoat in a two-coat system.
09 23 29 00/NGC Conventional Plaster Products Gold Bond® brand Two-Way Hardwall Plaster DESCRIPTION Gold Bond® brand Two-Way Hardwall Plaster is a basecoat gypsum neat plaster that requires the jobsite addition of an aggregate and water. When properly proportioned with aggregate, Two-Way Hardwall Plaster forms a hard, durable base for gypsum plaster finish coats. Complies with ASTM C28. Use Two-Way Hardwall Plaster with sand or expanded lightweight aggregate conforming to ASTM C35.
09 23 00/NGC Gold Bond® BRAND Conventional Plaster Products Gold Bond® brand Gypsolite® Plaster DESCRIPTION Gold Bond® brand Gypsolite® Plaster is a lightweight gypsum basecoat plaster mixed at the plant with correctly sized and proportioned perlite aggregate, requiring only the addition of water on the job. Gypsolite® Plaster meets ASTM C28. Gypsolite Plaster contains no asbestos.
09 23 29 00/NGC Gold Bond® brand Super-White Gauging Plaster DESCRIPTION Gold Bond® brand Super-White Gauging Plaster, quick set type or slow set type, is intended for jobsite mixing with hydrated lime. It consists of specially ground, calcined gypsum, which readily mixes with water and hydrated lime. Proper proportioning is essential, since gauging adds strength and hardness to the finish surface by reinforcing the plastic non-setting lime against shrinkage and cracking.
Gold Bond® BRAND Conventional Plaster Products Gold Bond® brand Plaster Accelerator DESCRIPTION Gold Bond® brand Plaster Accelerator provides minor adjustments to the set time for conventional and veneer plaster systems. Adding a plaster accelerator to the mix causes gypsum crystals to form at a much quicker rate, shortening set times. TEchnical Data Packaging Gold Bond® Boards / Plaster Gold Bond® brand Plaster Retarder 1.5 lb. (0.
