SDS
64-17-5 >15Ethanol
14807-96-6 >10Talc
4. First-aid measures
Move to fresh air. Call a physician if symptoms develop or persist.
Inhalation
Rinse skin with water/shower.
Skin contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.
Eye contact
Seek medical attention, or call a poison control center immediately if overdosed.
Ingestion
Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred
vision. Prolonged exposure may cause chronic effects.
Most important
symptoms/effects, acute and
delayed
Provide general supportive measures and treat symptomatically. Keep victim under observation.
Symptoms may be delayed.
Indication of immediate
medical attention and special
treatment needed
If you feel unwell, seek medical advice (show the label where possible). Ensure that medical
personnel are aware of the material(s) involved, and take precautions to protect themselves.
General information
5. Fire-fighting measures
Alcohol resistant foam. Powder. Carbon dioxide (CO2).
Suitable extinguishing media
Do not use water jet as an extinguisher, as this will spread the fire.
Unsuitable extinguishing
media
During fire, gases hazardous to health may be formed.
Specific hazards arising from
the chemical
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Special protective equipment
and precautions for firefighters
Use water spray to cool unopened containers.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
No unusual fire or explosion hazards noted.
General fire hazards
6. Accidental release measures
Applies only to the product when used in an industrial setting. Keep unnecessary personnel away.
Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and
clothing during clean-up. Do not breathe gas. Do not touch damaged containers or spilled material
unless wearing appropriate protective clothing. Ventilate closed spaces before entering them.
Local authorities should be advised if significant spillages cannot be contained. For personal
protection, see section 8 of the SDS.
Personal precautions,
protective equipment and
emergency procedures
Industrial: Wipe up discharged product and dispose as a solid waste. Empty aerosol cans can be
disposed of as solid waste.
Household: Product used in household may be disposed of in refuse or sewer.
Methods and materials for
containment and cleaning up
Avoid discharge into drains, water courses or onto the ground.
Environmental precautions
7. Handling and storage
Avoid contact with eyes. Avoid prolonged exposure. Provide adequate ventilation. Wear
appropriate personal protective equipment. Avoid release to the environment. Observe good
industrial hygiene practices.
Precautions for safe handling
Store in original tightly closed container. Store away from incompatible materials (see Section 10
of the SDS).
Conditions for safe storage,
including any incompatibilities
8. Exposure controls/personal protection
Occupational exposure limits
U.S. - OSHA
Value
Type
Form
Components
TWA 20 mppcf Unspecified.Talc (CAS 14807-96-6)
Gold Bond Powder Spray Fresh SDS US
930152 Version #: 01 Revision date: - Issue date: 22-November-2015
2 / 8








