SDS
SAFETY DATA SHEET
GOJO® Pink & Klean Skin Cleanser
Version
1.2
Revision Date:
02/10/2015
MSDS Number:
31606-00003
Date of last issue: 12/02/2014
Date of first issue: 11/24/2014
4 / 11
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Hazardous components without workplace control parameters
Ingredients
CAS-No.
Alcohols, C10-16, ethoxylated,
sulfates, sodium salts
68585-34-2
Cocoamidopropyl betaine
61789-40-0
Engineering measures
:
Ensure adequate ventilation, especially in confined areas.
Minimize workplace exposure concentrations.
Dust formation may be relevant in the processing of this
product. In addition to substance-specific OELs, general
limitations of concentrations of particulates in the air at
workplaces have to be considered in workplace risk
assessment. Relevant limits include: OSHA PEL for
Particulates Not Otherwise Regulated of 15 mg/m3 - total
dust, 5 mg/m3 - respirable fraction; and ACGIH TWA for
Particles (insoluble or poorly soluble) Not Otherwise
Specified of 3 mg/m3 - respirable particles, 10 mg/m3 -
inhalable particles.
Personal protective equipment
Respiratory protection
:
General and local exhaust ventilation is recommended to
maintain vapor exposures below recommended limits. Where
concentrations are above recommended limits or are
unknown, appropriate respiratory protection should be worn.
Follow OSHA respirator regulations (29 CFR 1910.134) and
use NIOSH/MSHA approved respirators. Protection provided
by air purifying respirators against exposure to any
hazardous chemical is limited. Use a positive pressure air
supplied respirator if there is any potential for uncontrolled
release, exposure levels are unknown, or any other
circumstance where air purifying respirators may not provide
adequate protection.
Hand protection
Remarks
:
Wash hands before breaks and at the end of workday.
Eye protection
:
Wear the following personal protective equipment:
Safety glasses
Skin and body protection
:
Skin should be washed after contact.
Hygiene measures
:
Ensure that eye flushing systems and safety showers are
located close to the working place.
When using do not eat, drink or smoke.
Wash contaminated clothing before re-use.