Material Safety Data Sheet
SAFETY DATA SHEET
GOJO® Premium Foam Antibacterial
Handwash
Version
2.0
Revision Date:
04/08/2015
MSDS Number:
31378-00005
Date of last issue: 03/19/2015
Date of first issue: 12/11/2014
4 / 20
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions,
protective equipment and
emergency procedures
:
Remove all sources of ignition.
Use personal protective equipment.
Follow safe handling advice and personal protective
equipment recommendations.
Environmental precautions
:
Discharge into the environment must be avoided.
Prevent further leakage or spillage if safe to do so.
Prevent spreading over a wide area (e.g. by containment or oil
barriers).
Retain and dispose of contaminated wash water.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
:
Non-sparking tools should be used.
Soak up with inert absorbent material.
Suppress (knock down) gases/vapors/mists with a water spray
jet.
For large spills, provide diking or other appropriate
containment to keep material from spreading. If diked material
can be pumped, store recovered material in appropriate
container.
Clean up remaining materials from spill with suitable
absorbent.
Local or national regulations may apply to releases and
disposal of this material, as well as those materials and items
employed in the cleanup of releases. You will need to
determine which regulations are applicable.
Sections 13 and 15 of this SDS provide information regarding
certain local or national requirements.
SECTION 7. HANDLING AND STORAGE
Technical measures
:
See Engineering measures under EXPOSURE
CONTROLS/PERSONAL PROTECTION section.
Local/Total ventilation
:
Use with local exhaust ventilation.
Use only in an area equipped with explosion proof exhaust
ventilation.
Advice on safe handling
:
Avoid inhalation of vapor or mist.
Do not swallow.
Do not get in eyes.
Avoid prolonged or repeated contact with skin.
Handle in accordance with good industrial hygiene and safety
practice.
Non-sparking tools should be used.
Keep container tightly closed.
Keep away from heat and sources of ignition.
Take precautionary measures against static discharges.
Take care to prevent spills, waste and minimize release to the