Safety Data Sheet

SAFETY DATA SHEET
GOJO® Cherry Gel Pumice Hand Cleaner
Version
1.0
Revision Date:
04/08/2015
MSDS Number:
90094-00001
Date of last issue: -
Date of first issue: 04/08/2015
5 / 15
(Form of
exposure)
parameters /
Permissible
concentration
Distillates (petroleum),
hydrotreated light
64742-47-8
TWA (Mist)
5 mg/m3
OSHA Z-1
TWA (Mist)
5 mg/m3
NIOSH REL
ST (Mist)
10 mg/m3
NIOSH REL
Hazardous components without workplace control parameters
Ingredients
CAS-No.
Ethoxylated branched C11-14,
C13-rich alcohols
78330-21-9
Engineering measures
:
Ensure adequate ventilation, especially in confined areas.
Minimize workplace exposure concentrations.
Use only in an area equipped with explosion proof exhaust
ventilation.
Dust formation may be relevant in the processing of this
product. In addition to substance-specific OELs, general
limitations of concentrations of particulates in the air at
workplaces have to be considered in workplace risk
assessment. Relevant limits include: OSHA PEL for
Particulates Not Otherwise Regulated of 15 mg/m3 - total
dust, 5 mg/m3 - respirable fraction; and ACGIH TWA for
Particles (insoluble or poorly soluble) Not Otherwise
Specified of 3 mg/m3 - respirable particles, 10 mg/m3 -
inhalable particles.
Personal protective equipment
Respiratory protection
:
General and local exhaust ventilation is recommended to
maintain vapor exposures below recommended limits. Where
concentrations are above recommended limits or are
unknown, appropriate respiratory protection should be worn.
Follow OSHA respirator regulations (29 CFR 1910.134) and
use NIOSH/MSHA approved respirators. Protection provided
by air purifying respirators against exposure to any
hazardous chemical is limited. Use a positive pressure air
supplied respirator if there is any potential for uncontrolled
release, exposure levels are unknown, or any other
circumstance where air purifying respirators may not provide
adequate protection.
Hand protection
Material
:
Impervious gloves
Material
:
Flame retardant gloves
Remarks
:
Choose gloves to protect hands against chemicals depending
on the concentration specific to place of work. Breakthrough
time is not determined for the product. Change gloves often!
For special applications, we recommend clarifying the
resistance to chemicals of the aforementioned protective
gloves with the glove manufacturer. Wash hands before
breaks and at the end of workday.