SDS

SAFETY DATA SHEET
GOJO® Clear & Mild Foam Handwash
Version 1.0
SDS Number: 400000000152
Revision Date: 09/20/2016
3 / 11
Specific extinguishing meth-
ods
:
Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Use a water spray to cool fully closed containers.
Further information
:
Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for firefighters
: In the event of fire, wear self-contained breathing apparatus.
Use personal protective equipment.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protec-
tive equipment and emer-
gency procedures
:
Use personal protective equipment.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Material can create slippery conditions.
Environmental precautions
:
Discharge into the environment must be avoided.
Prevent further leakage or spillage if safe to do so.
Prevent spreading over a wide area (e.g. by containment or oil
barriers).
Retain and dispose of contaminated wash water.
Local authorities should be advised if significant spillages
cannot be contained.
Methods and materials for
containment and cleaning up
:
Contain spillage, and then collect with non-combustible ab-
sorbent material, (e.g. sand, earth, diatomaceous earth, ver-
miculite) and place in container for disposal according to local
/ national regulations (see section 13).
Keep in suitable, closed containers for disposal.
Clean contaminated floors and objects thoroughly while ob-
serving environmental regulations.
SECTION 7. HANDLING AND STORAGE
Advice on safe handling
:
For personal protection see section 8.
Do not swallow.
Avoid contact with eyes.
Keep container closed when not in use.
Conditions for safe storage : Keep in properly labelled containers.
Keep container tightly closed in a dry and well-ventilated
place.
Store in accordance with the particular national regulations.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters
Components CAS-No. Value type
(Form of
Control parame-
ters / Permissible
Basis