User's Manual

Activity Counter Installation and Service
User Guide
August 22, 2013 5
Selecting a Location
Typically, the Activity Counter will be mounted on the ceiling, either directly or with a mounting bracket,
just inside the doorway to a room. Alternatively, the Activity Counter can be mounted on a wall or in a
doorway. These alternate mounting arrangements are useful in situations where there are obstructions
on the ceiling, or the doorway is sufficiently wide that pedestrian traffic cannot be guaranteed under the
Activity Counter.
Mounting
The Activity Counter can be directly mounted to solid surfaces using screws or adhesive. Alternatively, a
mounting bracket can be used to mount in areas where a direct mount is not optimal.
Direct Mounting to wall or ceiling
The Activity Counter comes with a mounting plate that can be
directly fastened to the ceiling or wall using screws or adhesive.
Screw mount
The mounting plate has four (4) holes for mounting.
 Position the mounting plate with the arrow pointing toward
the door or entry.
 Select one of the pairs of holes to use for mounting (either
along the arrow or across the arrow) and use the mounting plate
as a template to mark the chosen hole locations
 If mounting directly to a wood stud; Pre drill using a 1/8”
(3mm) bit and secure to the ceiling or wall with two #8 screws
(not included).
 If mounting to Metal Stud, Drywall, Concrete, or brick drill
holes for use two #8 wall anchors and secure with wall anchors
and #8 screws.
 Once the mounting plate has been secured, position the
Activity Counter over the tabs on the plate and twist clockwise to
finish the installation. Note that the mounting plate is keyed so
that the Activity Counter will only fit in one orientation.
Mounting
Plate
Adhesive
Pad