User's Manual

Activity Counter Installation and Service
User Guide
August 22, 2013 14
Battery Replacement
The Activity Monitor uses 3 “C” cells. For best results, replace only with alkaline batteries. To replace
the batteries, first turn off the Activity Counter, then twist the housing counter-clockwise to remove it
from the mounting plate. Remove the “C” cells from the Activity Counter housing and dispose of
properly. Replace with three new “C” cells, observing proper polarity. Replace the housing on the
mounting plate and twist clockwise to lock. Finally slide the power switch to turn on the unit. Ensure
that the red and green LED’s alternately flash for a few seconds.