User's Manual

Activity Counter Installation and Service
User Guide
August 22, 2013 11
Room
Identifies which room the sensor is associated to during the mapping process.
Updated
Shows the Time of last data transmission from the sensor to the network.
Usage
Shows the total count of usage for each sensor. The small broom icon allows the
end-user to clear the count data for a specific sensor. This will reset the compliance
data accumulated to date and should only be done during initial installation and testing.
The Name column allows you to identify a sensor by entering text into a cell in the Name column. To do
this, locate your sensor you want to name, and double-click in the cell next to it under the Name column.
When you finish typing, hit the Enter-key, or click on another sensor; this will save your text to the
database.
The serial number of the Activity Counter can be found on the label on the side of the unit. The serial
number will be the ID number listed in the table.
Locate the ID of the Activity Counter being added to the system in the table. Have someone walk into
the area monitored by the Activity Counter. Within a few seconds, the “Usage” column should
increment to indicate a newly-registered event.