Instruction Manual

9
To switch o, press and hold until the red indicator
lights up once.
Bluetooth Pairing
1. Ensure the earphones is switched o.
2. Press and hold
until the LED indicator light will
ash in red and blue alternately, it’s now in pairing
mode which will last for few minutes.
3. Activate the Bluetooth feature on your Bluetooth
device and start searching. Then select
“GTCONRG18” or “GTCONBK18”. If you are asked to
enter a code, type in 0000 or 1234.
4. When connected, the blue indicator will blink, and
you will hear “Connected”.
When the unit has found the last paired
Bluetooth® device, it will connect
automatically.
Switching On/O
To switch on, press and hold
until the blue indicator
lights up once.