Wireless On-ear Headphones Instruction Manual GTCONRG18 / GTCONBK18
Contents Safety Warnings ...............................................................4 Unpacking ........................................................................6 Product Overview ............................................................7 Headphone ...................................................................................... 7 Audio Cable ..................................................................................... 7 Charging the Battery .......................................
Safety Warnings • For traffic safety, do not use earphones while driving or cycling. Damage • Please inspect the unit for damage after unpacking. • Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch off, unplug from the mains socket and consult your dealer. Temperature • Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires.
Earphones • Listening to loud sounds for prolonged periods of time may permanently damage your hearing. • Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level.
Thank you for purchasing your new product. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues. Read all the safety instructions carefully before use and keep this instruction manual for future reference. Unpacking Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.
Product Overview Headphone 6 1 2 7 3 4 5 1. Status indicator 2. button • Power on/off • Bluetooth pairing 3. Charger connector 4. AUX IN socket Connect the 3.5mm audio cable with music players or mobile phones. 5. Microphone 8 9 10 6. Increase volume 7. Go to previous track 8. Audio playback 9. Go to next track 10.
Charging the Battery When using the unit for the first time, charge it fully first. The battery is charged automatically whenever the unit is connected to a computer or a USB charging device. Status Low battery 8 Status Indicator The indicator light will flash slowly in red. Charging The indicator light will light up red. Fully charged The indicator light will turn off.
Switching On/Off To switch on, press and hold until the blue indicator lights up once. When the unit has found the last paired Bluetooth® device, it will connect automatically. To switch off, press and hold until the red indicator lights up once. Bluetooth Pairing 1. Ensure the earphones is switched off. 2. Press and hold until the LED indicator light will flash in red and blue alternately, it’s now in pairing mode which will last for few minutes. 3.
NFC Operation NFC is a one touch way of pairing your NFC device via Bluetooth to your headphones. 1. Ensure the earphones is switched off. 2. Press and hold until the LED indicator light will flash in red and blue alternately, it’s now in pairing mode which will last for few minutes. 3. Activate NFC on your mobile device. 4. Place the NFC sensor area on the device close to the unit’s NFC sensor area (it will work best within 10 mm) to connect your device to the unit. 5.
Operation If you receive or make a call while listening to music, the music is paused until you end the call.
Operate with Audio Cable Multifunction Button To Playback Functions Answer / end a call Reject a call Press Button Multifunction once Hold Multifunction for 2 seconds then release Playback Functions Play / pause track Multifunction once Skip to next track Multifunction twice Go to previous track Multifunction thrice • You must turn the headphones off before connecting with 3.5mm audio cable. The Bluetooth feature will be disabled.
Reset the Headphones To hardware reset the headphones, connect the USB cable to a charging source. Hints and Tips Product not working: • Recharge the product. • Ensure the product is switched on. • Ensure your Bluetooth-enabled device’s wireless function is active. • Ensure there are no other wireless devices in discovery mode. • Move the product closer to the device. • Pair again the product and the device.
Specifications Model GTCONRG18 GTCONBK18 Sensitivity 105±3 dB Impedance 32 Ω Rated Input DC 5V Frequency Response 20 Hz – 20 kHz Frequency Band(s) BT: 2400 – 2482 MHz NFC: 13.56 MHz Max. Radio Frequency Power Transmitted BT: 5 dBm EIRP NFC: 6 dBuA/m Bluetooth Interface Bluetooth 4.0 Bluetooth Profiles A2DP, AVRCP, HFP, HSP Operating Distance <10 m (open space) Battery Type Lithium ion 500 mAh Battery Life Up to 16 hrs Charging Time 3.
Currys.co.uk All the support you need. Whether it’s a tech emergency or you need plain good advice, we’re always on hand to help. UK: 0344 5611234 IRE: 1 890 818 575 Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster. co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.
Notes for battery disposal The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste. For more information, please contact the local authority or your retailer where you purchased the product. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
