User's Manual

4.2 Auto lock
● When Gogoro B01 is not moving, there’s no smartphone BLE link, for a period of time
(5 / 10 / 15 min / OFF, APP adjustable), Gogoro B01 enters “Locked Mode”.
● Default is OFF, user needs to enable it via phone APP.



5. Charging
● Always charge the battery to full level when B01 is not in use.
○ Connect AC wall outlet and charging stand.
○ Put charger on Gogoro B01 to initial charging.
○ The LED on the charger should be green. The LED on the B01 should be on
while charging, and off when charging is completed.
● Keep the charger connected with both B01 and AC wall outlet when B01 is not in
use, in order to keep the battery healthy.
● Do not connect the charger with B01 only, without connecting to the AC wall outlet. If
you do so, the battery will drain faster and the battery life might be affected.
Meaning
Hub LED
Blue
Charger
LED Red
Charger LED
Green
AC connects to charger
N/A
Off
On
Charging complete
Off
Charging
On
On
Off
Error, cannot charge battery
Fast flash
Off
On

Warning: Plug and unplug the charger connector vertically and gently. Applying
excessive force on the connector with improper angle might damage the
hardware.

Warning: When the battery is left to be at a low level of charge for too long, it can
become damaged. Please always connect the charger with B01 and wall AC
outlet, and keep the battery fully charged when you are not using the Gogoro B01.

Warning: In order to protect the battery from damage by over-discharge, be sure
to charge the battery to full level before you store of ship the Gogoro B01, and
charge the battery at least once per month.
16