Use and Care Manual

06
01
Before Installation
Please Note Before Installation:
1. Please read all instructions carefully before assembling the item.
2. After opening the package, first check if there is transit damage or missing
parts.
3. Please power the mirror with plug to test the mirror and each functions
before installation.
4. Assembly by two or more adults is highly recommended.
5. Disconnect power before installing, adding or changing any components.
6. Ensure that the fixing location is able to take the weight of the complete
fitting.
7. Keep the voltages between 110V and 120V. If the voltage exceeds 120V,
please use transformer.
8. To connect the wires to electrical junction box, a qualified technician or
electrician is highly recommended.
9. Before cleaning the mirror, make sure that the power supply is disconnected.
State of LED Light
Meaning
White Light ON
Function is Working
Blue Light ON
Function Standby
Light OFF
Power OFF
LED doesn't turn on /
Defogging doesn't work
Open the cover of the power supply
on the back of the mirror to test the
power cables, tighten the cables if
they are loose. ( Please cut off the
power first before testing the power
supply and cables)
Part of light strip is fault
Firstly, please pull the outer silicone
strip away and press the inner light
strip inward. If it still doesn't work,
need replace the strip light.
After using for a few
month, the light doesn't
work.
Please contact us to replace the
power supply.
Meaning of LED Lights
Troubleshooting