Use and Care Manual

02
05
Installation Instruction
Check Functions
Before installation, please check to make sure these
functions work properly:
Anti-fog Switch: After connecting the power, the anti-fog function is already turn on
automatically. If you don't need to use it, just touch it to turn it off, to prevent wasting energy.
The defogging will take effect within 10 minutes after its turned on , so you can turn it on 10
minutes before taking a bath.
Dim Switch: The led light supports 10% to 100% brightness adjustment, just long press the
button. This button has memory function, the next time you open the mirror it will be in the
same brightness it was in before it was last closed, which means that you don't have to touch
the button each time.
Color Temperature Switch: The front and back lights all have three color temperatures that
can be switch (3000K / 4000K/ 6000K ), just need to short press this button. And this button
has a memory function as well.
Knock the nail in.
1. Tighten the screw to ensure the wall
bracket stay sturdy on the wall.
2. Hang the mirror on the wall bracket .
When installing, pay attention to follow the
direction of the switch (easier to operate)
to install.
Turn on the power switch.