User Manual

EN - 18

ACCESSORIES

Eartips, USB Charge Cable, Charging Case

DEVICE LAYOUT

1) Touch control area

2) Charging interface

3) Charging case battery

indicator

POWER ON & PAIRING

Option 1: AUTO ON & PAIRING

With the two headsets in case and lid open to active Power ON. Take out the headsets and wait

about 10 seconds until LEFT & RIGHT earbuds AUTO paired. The LED lights will ash orange

and white alternately.

Option 2: Manually ON & PAIRING

Pick up the headset from the charging case, long tap the L&R earbuds for 6 seconds until they

powered OFF. After a while (5 seconds), long tap the L&R earbuds for 3-5 seconds. After connecting,

the LED lights will ash orange and white alternately. The left earbud is working as a Master. The right

is working as a Slave.

RESET

In case of failure pairing or unnormal working, you need to RESET the earbuds as following:

Long press and hold the multi-functional key of both earbuds and put them into the charging case

to charge, then release the multi-functional key.