Installation Guide

EN - 9
device and the mobile device. Charging starts automatically.
Please use compatible charging cable (not included) for using PD
(Power Delivery) function.
Charging the power bank
Connect the backup power supply using a charging cable to a power supply
with a minimum charging current of 5V / 2A. Micro USB or USB-C input on
the device can be used.
Capacity Indication
Press the main button to show the remaining capacity.
ATTENTION
This device has safety protection that prevent the battery from damages
when overcharging.It is normal for the casing to become warm during
charging and it will gradually cool down to room temperature after fully
charged.
Please make a complete charge every three month to avoid shorten
the mobile power life span.
TECHNICAL SPECIFICATION
Battery type: Li-pol Battery
Capacity: 20 000 mAh
Input: Micro USB / USB-C DC 5 V / 2 A, 9 V / 2 A
Output: USB-C DC 5 V / 3 A ,9 V 2,22 A, 12 V / 1,67 A
USB 1/2 DC 5V / 3 A, 9 V / 2 A , 12 V / 1,5 A
Dimension: 145 x 68 x 28,5 mm
Weight: 453 g
CAUTION
• Please completely full charge the mobile power in first usage.
• Please make sure that use standard cable with appropriate specification,
or it may lead to the mobile power damage.
• Please confirm the voltage of the electric device is 5V before charging it.
• Do not drop, knock, disassemble or attempt to repair the mobile power
by yourself.
• Do not immerse or put the mobile power in water or damp place.
• Do not expose or put the mobile power near to heat sources or flammab-
le place.
• Do not put the mobile power in car, for strong light and high temperature
will lead to product damage.