User Manual

EN - 32
Creating a custom equalization setting
• Press and hold the MENU button to view the main menu.
• Turn and press the ENTER/SCAN to select ‘System settings’ > ‘Equalizer’ > ‘My EQ setup’.
• Turn and press the ENTER/SCAN to choose ‘Bass’ or ‘Treble’.
• Turn and press the ENTER/SCAN to set the level from ‘-7‘ (low) to ‘+7’ (high).
To switch the loudness setting on or off:
• Press and hold the MENU button to view the main menu.
• Turn and press the ENTER/SCAN to select ‘System settings’ > ‘Equalizer’ > ‘My EQ setup’.
• Turn and the ENTER/SCAN to scroll down to ‘Loudness’.
• Press the ENTER/SCAN to toggle the loudness setting ‘Yes’ or ‘No ’.
Backlight
You can adjust the duration that the screen is illuminated for and the brightness of the screen.
Timeout
To adjust the duration of the screen backlight before dimming:
• Press and hold the MENU button to view the main menu
• Turn and press the ENTER/SCAN to choose ‘System settings’ > ‘Backlight’.
• Turn and press the ENTER/SCAN to choose ‘Timeout’.
• Turn and press the ENTER/SCAN to choose a timeout setting. To specify that the backlight should
• always remain on, choose ‘On’.
On level
• Press and hold the MENU button to view the main menu
• Turn and press the ENTER/SCAN to choose ‘System settings’ > ‘Backlight’.
• Turn and press the ENTER/SCAN to choose ‘On Level’.
• Turn and press the ENTER/SCAN to choose between ‘High’, ‘Medium’ or ‘Low’.
Dim level
• Press and hold the MENU button to view the main menu.
• Turn and press the ENTER/SCAN to choose ‘System settings’ > ‘Backlight’.
• Turn and press the ENTER/SCANt o choose ‘Dim Level’.
• Turn and press the ENTER/SCAN to choose between ‘High’, ‘Medium’, ‘Low’.
Changing your preferred language
You can select the language for menus and options.
• Press and hold the MENU button to view the main menu.
• Turn and press the ENTER/SCAN to choose ‘System settings’ > ‘Language’.
• Turn and press the ENTER/SCAN to select a menu language.
Carrying out a factory reset
Resetting removes all presets, stored stations, alarms and resets all other options to default settings.
• Press and hold the MENU button to view the main menu...
• Turn and press the ENTER/SCAN to choose ‘System settings’ > ‘Factory Reset’.
• Turn and press the ENTER/SCAN to select ‘Yes’ to reset factory settings. Select ‘No’ if you do not
want to reset to factory settings.