User Manual

EN - 30
USING THE BLUETOOTH
You can use Bluetooth to wirelessly connect to a device, such as a mobile phone or tablet. You can
then stream music from your mobile phone or tablet through. The rst time you connect a Bluetooth
device, you need to pair them. After you‘ve paired a device , remembers it for the next time.
Listening to a Bluetooth device
• Press the SOURCE button to select “BT“ (Bluetooth).
• On your Bluetooth device switch Bluetooth on, find DAB 620 BTC and connect.
• Select your favorite song, tap the PLAY Button on your Bluetooth device or the ENTER/SCAN
Button on the device to play or pause the song from your Bluetooth device.
• Press the TUNE +/- Button to select the Next or Previous track.
• If you want to pair (link) the device with another Bluetooth device, press and hold the SOURCE/BT
Button a few seconds. The device will go into Pairing/Discoverable mode.
Note: For more information, see your Bluetooth device‘s user manual. If you are asked to enter a passcode, enter
0000.
Disconnecting a Bluetooth device
To disconnect a Bluetooth device, do one of the following:
Press SOURCE to switch to digital radio or FM radio. Switch o󰀨 Bluetooth on the connected device.
SETTING ALARMS AND TIMERS
Setting an alarm
• Press and hold the MENU button to view the main menu.
• Turn and press the ENTER/SCAN to choose ‘System settings’ >’Alarm’.
• From the ‘Alarm’ menu, turn and press the ENTER/SCAN to select either ‘Alarm 1’ or ‘Alarm 2’.
• Press ENTER/SCAN to turn ‘Alarm’ to ‘On’.
• Turn and press the ENTER/SCAN to change the ‘Frequency‘.
• Select ‘Wake Up time’ by turning and pressing the ENTER/SCAN, turn the dial to adjust the hours
and minutes, pressing ENTER/SCAN to confirm each section.
• Turn and press the ENTER/SCAN to select ‘Source’. Turn and press the ENTER/SCAN to choose
between ‘Buzzer’, ‘Digital Radio’ or ‘FM’, then press the ENTER/SCAN to confirm.
• If you’ve chosen ‘Digital Radio’ or ‘FM’ radio, turn and press the ENTER/SCAN to select ‘Preset’.
To play the station you last listened to, turn and press the ENTER/SCAN to select ‘Last listened’ or
turn and press the ENTER/SCAN to choose a radio station from the preset list.
Note: Skip this step if you are setting a Buzzer alarm.
• Turn and press the ENTER/SCAN to select ‘Duration’. Turn and press the ENTER/SCAN to set the
duration that the alarm will sound in minutes.
• Turn and press the ENTER/SCAN to select ‘Volume’. Turn and press the ENTER/SCAN to set the
volume of the alarm.
Snoozing a sounding alarm
To snooze a sounding alarm, press the ENTER/SCAN. The display will show a countdown timer to
show how long the alarm will snooze for. To adjust the amount of time the alarm will be snoozed by,
press the Select dial to change the snooze duration in 5 minute intervals up to 15 minutes, and then
30 minutes. To cancel a snoozing alarm press the
STANDBY button.
Setting the sleep timer
Press the MENU button and turn and press the ENTER/SCAN to select ‘System Settings’. Turn and
press the ENTER/SCAN to select ‘Sleep’. Turn and press the ENTER/SCAN to adjust the length of
the sleep timer.