User's Manual

VIBE WARNINGS
01
800.922.2147 www.smartparts.com
– THE VIBE IS NOT A TOY.
– MISUSE OF THE VIBE MAY RESULT IN SERIOUS INJURY OR DEATH.
– EYE PROTECTION SPECIFICALLY DESIGNED FOR PAINTBALL USE MUST BE IN COMPLIANCE
WITH ASTM SPECIFICATION F1776 AND MUST BE USED BY THE USER AND ANYONE WITHIN
RANGE OF THE VIBE.
– WEAR EYE PROTECTON DURING DISASSEMBLY OR MAINTENANCE.
– SMART PARTS RECOMMENDS THAT THE VIBE ONLY BE SOLD TO PERSONS 18 AND OLDER.
– THOROUGHLY READ THE VIBE MANUAL BEFORE OPERATING.
– TREAT EVERY PAINTBALL MARKER AS IF IT WERE LOADED.
– NEVER LOOK DOWN THE BARREL OF A PAINTBALL MARKER.
– KEEP YOUR FINGER OFF THE TRIGGER UNTIL READY TO SHOOT.
– NEVER POINT THE VIBE AT ANYTHING YOU DON’T WISH TO SHOOT.
– KEEP THE VIBE ON SAFE (POWER OFF) UNTIL READY TO SHOOT.
– KEEP THE BARREL BLOCKING DEVICE ON THE VIBE’S MUZZLE WHEN NOT SHOOTING.
– ALWAYS REMOVE PAINTBALLS AND DEGAS THE VIBE BEFORE DISASSEMBLY.
– STORE AND TRANSPORT THE VIBE UNLOADED AND DEGASSED IN A SECURE PLACE.
– FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS FOR PROPELLANT
SOURCE HANDLING, STORAGE, AND FILLING.
– DO NOT SHOOT FRAGILE OBJECTS SUCH AS WINDOWS.
– ALWAYS MEASURE THE VELOCITY OF PAINTBALLS FIRED BY THE VIBE BEFORE USE, AND
NEVER ADJUST TO FIRE ABOVE 300FPS (91.44 M/S.)
PLEASE READ CAREFULLY