User's Manual
MAINTENANCE
The Vibe has been designed with simplicity in mind so that you can concentrate on your game instead of
your marker. It has a minimal number of moving parts and seals so that you can maintain the marker with
little effort. This DOES NOT mean that you should neglect your marker. If you take care of it off the eld,
your Vibe will take care of you on the eld. For best performance, clean and grease your Vibe frequently.
Many players clean their marker after every use. While this may seem a bit extreme, being vigilant in the
upkeep of your marker will extend its useful life considerably. Playing in the rain will not damage your Vibe,
but you should NEVER immerse it in water. If your marker should become waterlogged, remove the bar-
rel, body cover and rubber grips and allow them to dry out, then follow the disassembly instructions for
full cleaning. Clean out mud and paint with a damp cloth and alcohol. Grease the Vibe ONLY with SL33K
pneumatic grease. For best performance, use high quality paintballs.
VITAL STATISTICS
LENGTH/HEIGHT/WEIGHT:
OPERATING PRESSURE:
PAINTBALLS:
POWER SOURCE:
PROPELLANT:
RATE OF FIRE:
OPERATION:
MODES OF FIRE:
ANTI CHOP SYSTEM:
BARREL THREAD:
LUBRICANT:
8.75”/ 7.5”/1lb, 11oz
Approx 160 to 200 psi max
.68 caliber – Compliant to ASTM F1979 Specication
9-volt alkaline battery
CO2 or Nitrogen/Compressed Air
Up to 11bps
Low-Pressure Electropneumatic
Semi-Automatic
Low Bolt Pressure
Smart Parts (Impulse/Ion
For proper and consistent operation, the Vibe should only be lubricated with
SL33K lubricating grease.
STATISTICS
PLEASE READ CAREFULLY
While every effort has been made to ensure
that the information contained in this guide
is accurate and complete, no liability can
be accepted for errors or omissions. Smart
Parts, Inc. reserves the right to change
the specifications of the Vibe at any time
without prior notice. The latest version of
this manual may be downloaded free of
charge at www.smartparts.com.
00
800.922.2147 www.smartparts.com