Manual

owner’s manual
owner’s manual
GOG Paintball USA
100 Station Street
Loyalhanna, PA 15661
While every effort has been made to ensure
that the information contained in this manual
is accurate and complete, no liability can be
accepted for errors or omissions. GOG Paintball
reserves the right to change the specications of
the eNMEy
TM
at any time without prior notice.
The latest version of this manual may be
downloaded free of charge at GOGPaintball.com
eNMEy Manual v 1.0 Copyright © 2012, GOG Paintball SA, all
rights reserved. eNMEy, the eNMEy logo, GR33SE and the GOG
logo are trademarks or registered trademarks of GOG Paintball SA.
The eNMEy is covered by one or more of the following U.S. Patents:
5,613,483; 5,881,707; 5,967,133; 6,035,843; 6,474,326; 6,637,421;
7,100,593; 7,603,997; 7,610,908; D535,709; D546,297; D548,201;
D571,415. Additional US and foreign patents pending.
• THE ENMEY IS NOT A TOY.
• MISUSE OF THE ENMEY MAY RESULT IN SERIOUS INJURY OR DEATH.
• EYE PROTECTION SPECIFICALLY DESIGNED FOR PAINTBALL MUST BE
USED IN COMPLIANCE WITH ASTM SPECIFICATION F1776 AND MUST
BE USED BY THE USER AND ANYONE WITHIN RANGE OF THE ENMEY.
• WEAR EYE PROTECTION DURING DISASSEMBLY OR MAINTENANCE.
• GOG PAINTBALL RECOMMENDS THAT THE ENMEY ONLY BE SOLD TO
PERSONS 18 AND OLDER.
• THOROUGHLY READ THE ENMEY MANUAL BEFORE OPERATING.
• TREAT EVERY PAINTBALL MARKER AS IF IT WERE LOADED.
• NEVER LOOK DOWN THE BARREL OF A PAINTBALL MARKER.
• KEEP YOUR FINGER OFF THE TRIGGER UNTIL READY TO SHOOT.
• NEVER POINT THE ENMEY AT ANYTHING YOU DON’T WISH TO SHOOT.
• KEEP THE ENMEY ON SAFE UNTIL READY TO SHOOT.
• KEEP THE BARREL BLOCKING DEVICE ON THE ENMEY’S MUZZLE WHEN
NOT SHOOTING.
• ALWAYS REMOVE PAINTBALLS AND DEGAS THE ENMEY BEFORE
DISASSEMBLY.
• STORE AND TRANSPORT THE ENMEY UNLOADED AND DEGASSED IN A
SECURE PLACE.
• FOLLOW ALL MANUFACTURER’S WARNINGS AND INSTRUCTIONS FOR
PROPELLANT SOURCE HANDLING, STORAGE AND FILLING.
• DO NOT SHOOT FRAGILE OBJECTS SUCH AS WINDOWS.
• ALWAYS MEASURE THE VELOCITY OF PAINTBALLS FIRED BY THE
ENMEY BEFORE USE, AND NEVER ADJUST TO FIRE ABOVE 300 FPS
(91.44M/S).
• PROVIDE THIS MANUAL, OR A COPY WITH THE ENMEY IF GIVEN,
LOANED OR OTHERWISED TRANFERRED TO A NEW OWNER.
maintenance
maintenance
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
E
bill_instruction_sheet_exploded
REV
bill_instruction_sheet_exploded
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
WEIGHT:
REV
DWG. NO.
E
SIZE
TITLE:
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
±
ANGULAR: MACH
±
BEND
±
TWO PLACE DECIMAL
±
THREE PLACE DECIMAL
±
APPLICATION
USED ON
NEXT ASSY
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
DISASSEMBLY: The valve system in the eNMEy
TM
has only one
major moving part, making it very simple to maintain. This does
not mean it can be ignored. The eNMEy
TM
should be disassembled
and cleaned when it shows erratic performance, becomes
contaminated with dirt, paint or other debris, or for general
maintenance after 3 or 4 days of use.
• Unload and de-gas the eNMEy
TM
. Use a 5/16-inch allen wrench to
unscrew and remove the bolt sleeve.
• Using a soft tool like a wooden chopstick, push the bolt and bolt
stop out the back of the eNMEy
TM
.
• Clean the interior of the body and all removed parts. Inspect all
o-rings for wear or damage and replace if necessary.
• Lightly lubricate o-rings with GR33SE
TM
marker lubricant. Slide
the bolt stop onto the bolt from the rear. Slide the rear of the bolt
into the bolt sleeve and gently screw into the rear of the eNMEy
TM
.
WARRANTY: GOG Paintball SA warrants to initial retail purchaser
that the eNMEy
TM
paintball marker and regulator are free from
defects in materials and workmanship over their operational life. This
warranty is limited to the repair or replacement of defective parts
with the customer to pay shipping costs. Disposable parts (o-rings,
springs, seals, screws, rubber grips, hoses, tubing, ball detents,
bottom-line ASA, etc.) are not warranted. This warranty does not
cover surface damage (scratches and nicks), damage resulting from
misuse, improper disassembly and re-assembly or attempts to drill
holes or remove metal or polymer which could degrade performance
and reduce pressure safety factors of the marker. Do not make
changes to the basic marker parts without written approval. The only
authorized lubricant for the marker is DOW 33 lubricant (GR33SE
TM
).
Use of any other lubricant may invalidate warranty. Paintball markers
are non-refundable. This warranty is effective only if the customer
registers the product online at gogpaintball.com within 30 days of
purchase. This warranty is non-transferrable. Trigger alteration of
any kind may result in serious injury and may void warranty.
WEIGHT:
OPERATING PRESSURE:
PROPELLANT:
OPERATION:
ANTI CHOP SYSTEM:
BARREL THREAD:
PAINT COMPATIBILITY:
1.65 lbs - 1.86 lbs with barrel
190 psi
CO2 or Nitrogen/Compressed air
Low pressure pneumatic
Low-Force bolt
GOG
®
.68 caliber standard paintballs