F80DVR 10.
1. Product overview.................................................................................................................. - 3 2. Product composition list.....................................................................................................- 4 3. Product description..............................................................................................................- 5 4. SD card specifications.................................................................................
The F80DVR 10.26 uses two wide-angle cameras installed inside and outside the vehicle to capture images of the surrounding area and transmit them to the integrated device in real time. With the help of this system, the driver can see the obstacles and pedestrians around the vehicle intuitively, and effectively reduce the occurrence of scraping, collision, collapse and other accidents. This product can record all driving pictures to avoid accident fraud.
Name Graphic Instructions Number 10.26 -inch FHD display (1600*600) / 2 -channel camera The host interface/touchcontrol / Bluetooth 1 / Wi-Fi / FM Transmitter / SD card recording /Type C interface power supply Type C power cord/ 12V~24V / The power cord 3A current / integrated cable / 1 cigar lighter to take power Pull back camera AHD FHD (1080P)/4PIN BMW head Pull the Pull back headphone cable / 6m headphone /2.
Project Function Performance indicators introducti on Simplified Chinese / Traditional Chinese / Language English / Russian / Spanish / French / Germa / Japanese /Korean/Italia/Português System Interface Mode of operation Graphical menu operation Touch Video input 2..5K+1K channels video input Video mode Default boot recording, no missing seconds Video input The video format Real-time display 2.5K H.264 video, 2 channels of video saved separately 10.
FM The video store SD card The microphone FM Transmitter support, connected to the car radio CLASS10 U1 : 32GB minimum and 256GB maximum Support microphone recording, menu can be set to turn off Audio part Voice control Support voice control, menu can be set to turn off The voltage drop line supports 12V~24V wide Power part The power input voltageand has power protection circuits such as surge,overload, overvoltage, undervoltage and short circuit Power consumpti Two-way video Less than 10W (sc
4. SD The quality of SD card has a great impact on the stability of video recording. To record video safely, use SD cards from major brands such as SanDisk, Kingston, Toshiba, and Samsung. Speed certification must be at least Class10.
6. The details are as follows: Port Type C interface Instructions Monitor power supply interface The cigarette lighter takes power directly Note: The product comes with a cigarette charger asstandard. If you do not use our original charger, Cigarette charger youneed to buy a compliant high-quality cigarette charger,otherwise it is easy to damage the machine or cause other injuries due to insufficient voltage and heat.and FMTransmitter function cannot work normally.
7. Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen and then drill the appropriate size of the screw hole. Fix the camera to the rear of the car with screws, the reversing trigger wire (red thin wire) needs to be connected to the positive pole of the reversing light, and finally use the camera extension cable to connect to the monitor. （This is not necessary if you choose the version without the reversing camera.
8.
As shown in the figure, click the [Apple CarPlay] button to enter the Apple CarPlay. Turn on the Wi-Fi and Bluetooth of the mobile phone first, then as shown in the figure below, select the [Apple CarPlay] option, click the [BT Manage] option of the interface, connect Bluetooth with the phone, you can open the application. When the machine is powered on, it will try to automatically connect to the last connected phone.
(Hull screen mode) Note: In the drop-down menu of the mobile phone, you need to click to turn off Bluetooth first, and then click the Turn off WiFi button to disconnect. Just turn off the WiFi button alone, and the car will keep trying to ① ② reconnect.
As shown in the figure, click the [Android Auto] button to enter the Android auto. Turn on the Wi-Fi and Bluetooth of the mobile phone first, then as shown in the figure below, select the [Android auto] option, click the [BT Manage] option of the interface, connect Bluetooth with the phone, you can open the application. When the machine is powered on, it will try to automatically connect to the last connected phone.
You can find Bluetooth Music by clicking the button Apple CarPlay or Android Auto. Turn on Bluetooth of the mobile phone first, and select [Bluetooth Music] option. Click the [BT Manage] option on the interface to connect Bluetooth to the mobile phone and start playing music. The buttons correspond to Last, Play / Pause and Next, respectively. Click on the Lyrics button [ Click the [ ] to display the lyrics. ] button to enter the Dvr screen.
As shown in the picture above, the main page will not display the camera image, you need to click the Dvr button to view the camera image. When a card is inserted, the system automatically enters the video mode, and when recorded, the small red dots in the [Driving Monitoring] button will flash. Start recording and click Close recording again. Lock the video for a few minutes and the data will not be deleted. Click to take a photo with one click. View playback video. Turn recording sound on or off.
E. As shown in the figure above, click the Bluetooth button [ ] to switch on the device after entering the Bluetooth interface. The page will display the device name, such as: T86-1BCC9D, and click the Modify button [ ] to modify the Bluetooth name of the device. Select the device name with Bluetooth, and the remote device name of the phone will appear after successfully connecting. At this time, you can play mobile phone music and other functions.
As shown above, click the [Playback] button to enter the video playback interface. You can click any to play back the video and play the video on the right. [Front] cyclic video shot by the front camera. [Rear] a circular video shot by the rear camera. [Lock] Click the video saved after locking. [Photos] Click to view the pictures taken by the one-click photo function. Click the [Delete] button to delete the material.
As shown in the figure, click the [ enter the setting interface.
Click to enter the [Record resolution] settings: Resolution selection: 2.5K+1080P / 1080P+1080P/720P+720P Click [Split time] to enter the setting of the video segmentation time: Video segmentation time is optional: 1 minutes / 3 minutes / 5 minutes. The system defaults to 3 minutes. Click [Microphone] to enter the settings: You can choose to close or open. Click [Image mirror] to enter the settings: You can choose to close or open. This option makes it easier for customers to install the camera flexibly.
Click [Screen saver] to enter the settings: Screen saver can be set to: off / 10 seconds / 30 seconds / 1 minute Set 1 or 5 minutes, the system will run without corresponding time, and the screen will automatically turn off. After entering the screen saver, press the power button again to light up the screen.
See the instructions below. Click [Language] to enter the settings: Language can be set up: Simplified Chinese / traditional Chinese / English / Russian / Spanish / French / German / Japanese / KoreanItalia/Português Click [Storage Information] to enter the menu:You can view the information of the SD card. The former item indicates the remaining available capacity, and the former item indicates the total capacity.
Click [Format] to enter the settings: This option formats all data information inserted. It is recommended to manually form format the first insert SD card to ensure sufficient cardcapacity. Note: It is recommended that users manually format the SD card regularly. Click [Factory reset] to enter the Settings: Restore the factory settings, and you restore all the settings to the initial state.
The following commands are supported: Show front camera / Show rear camera / Turn on display / Turn off display / Show all cameras Click [Reverse Line Calibration] to enter the settings: Park the car in the middle of the parking space, manually drag [ ], adjust the position of the reversing auxiliary line up, down, left and right, so that the reversing auxiliary line and the parking line are level with the ground. After adjusting the reversing line, click [confirm] to confirm.
9. Troubleshooting Item Problem Unable to start F80 supports 12V- Solution ① Check whether the DC head of the cigarette lighter power cord is damaged or aging. 24V car use, ② Check whether the fuse of the high voltage power plug is disconnected or cannot be burned. used) ① Touch is invalid during power- on, wait for normal power-on 2 No touch phenomen on before operation. ② Check whether the touch is damaged, do not touch the screen with sharp objects, it is easy to scratch and damage.
① Buy the manufacturer s matching 3 rear-view camera before it can The rear viewcamera be used. ② Whether the AVI N interface is has no image inserted to the bottom. ③ Check if the camera format matches ① Avoid direct sunlight or exposure to sunlight during use. The normal Machine heat, 4 Jam operating temperature of F80DVR is ～ -20 ~70 ℃. After disconnecting the phenomenon power supply, the temperature of T86will be lower than70 ℃ and work normally.
Reminder: Please ensure that there is no obstruction between the mobile phone and the device, and the Wi-Fi / Bluetooth signal communication is smooth, otherwise the product functions cannot be used smoothly.
10.
