Instructions / Assembly

Portable Party Bar
Portable Party Bar
User Guide
Included:
GoBar Frame
Storage Shelf
3 Front Skirts
Carrying Case
Bar Setup:
Always setup on a flat and even surface. Unpack contents of the carrying case:
1: Begin by laying table on side and fold out both legs.
2: Lock leg hinges and stand table upright.
3: Place the lower storage shelf between the two cross supports on the legs. (See diagram below)
4: Secure the shelf bracket over the cross support edge to lock the shelf in place.
5: Choose a front skirt and velcro it onto the frame, covering the front and sides.
Warnings:
Injury and/or damage may occur if failure to do the following:
Do not stand on or use for any other purpose than its intended function. This product is designed for light use only.
Always setup the GoBar™ on a flat and even surface. Failure to do so may cause the bar to tip over causing damage.
Be aware if using GoBar in high winds, the front skirt can cause the bar to tip over.
Guidlines:
Bar Top Maximum Weight: 25 pounds
Shelf Maximum Weight: 25 pounds
Front skirts are NOT machine washable. To clean, use a damp rag and water.
Customer Service:
If you have any questions or concerns regarding your GoBar™ Portable Party Bar, please reach out to us at
info@pandpimports.com and we will get back to you right away. We 100% stand behind our products and want to make
sure you get the full enjoyment that you paid for. Enjoy!
Football Skirt Black SkirtTiki Skirt
1020
GoBar™ Shelf Setup
Cross Support
Shelf Bracket
3: 4:

Summary of content (1 pages)