User Guide

5
Figure 2: Receiver (RX)
1. RX ID Displays the receiver's ID number
2. IR Window
Receives IR signals from the included
remote control to set/select the channel
3. Power LED On when receiver is powered on
4. TX Connected
Displays transmitter's ID number for
device pairing
5. Reset Button Press the button to reset the receiver
6. Power Jack Connects to the included power adapter
7. Data LED Blinks when data transmission is detected
8. RJ45 Input
Connects to the transmitter's RJ45 Output
using a CAT5e/6 cable
9. Link LED Lights up when RJ45 signal detected
10. IR Input Connects to the IR receiver extension cable
11. HDMI Out Connects to a HDMI display
12. RS232 RS232 pass through