User Guide
14
Computer Control User Guide
The HDbitT E-Matrix Control application is
compatible with Windows only. Download it
from www.hdbitt.com/download-matrix.
1. Connect your Windows computer to the
Ethernet network.
2. For non-DHCP networks:
Change your computer's IP address to
192.168.1.xxx (xxx can be 0 to 255, excluding
210 & 220), the same subnet as your TX and
RX unit.
For DHCP enabled networks:
Enable DHCP on your computer and
connect it to the network. (Note: If DHCP is
enabled simply plug into your network)