User Guide

13
IR User Guide
IR Extension Cables
The IR Blaster extension cable should be plugged
into the IR Out port of the transmitter and the IR
Receiver extension cable should be plugged into
the IR In port of the receiver. The emitter of the
IR Blaster extension cable should be placed as
close to the IR receiver window of the source
device.
Remote Control
Use the included remote control to set/select the
TX ID on the transmitter and the TX connected ID
on the receiver for device pairing.
Device ID Control User Guide
Push Button Control
Press the left or right button control to change the
Device ID and Connection ID to the desired
number. To connect to the desired HDMI source
device, set the Receiver's TX Connected ID to
match the Transmitter's TX ID for successful
device pairing.