User Manual
1. Feed one lubricant sheet directly into shredder throat. Note: if shredder throat is extra wide,
use lubricant sheets in landscape position to cover entire feed opening to ensure complete
coverage.
2. After lubricant sheet has completely passed through feed opening, run the shredder in
REVERSE for 10 seconds to complete lubrication.
This product is carbon neutral. It meets Carbonfund.org’s CarbonFree®
Product Certication protocol which requires third-party life cycle
assessment of the product’s carbon footprint, and carbon reductions in
support of third-party validated renewable energy and reforestation
projects. To learn more, visit www.carbonfund.org/products.
Insert sheet into shredder in this direction only for extra-wide feed opening.
For standard width feed openings
TO ENSURE THAT ALL SHREDDER BLADES ARE EVENLY LUBRICATED,
INSERT LUBRICANT SHEET AS SHOWN BELOW.
For extra-wide feed openings
Insert sheet into shredder in this direction.
© 2011 All rights reserved. Patent pending.
1. Feed one lubricant sheet directly into shredder throat. Note: if shredder throat is extra wide,
use lubricant sheets in landscape position to cover entire feed opening to ensure complete coverage.
2. After lubricant sheet has completely passed through feed opening, run the shredder in REVERSE
for 10 seconds to complete lubrication.
*This product is carbon neutral. It meets Carbonfund.org’s CarbonFree®
Product Certication protocol which requires third-party life cycle
assessment of the product’s carbon footprint, and carbon reductions in
support of third-party validated renewable energy and reforestation
projects. To learn more, visit www.carbonfund.org/products.
Insert sheet into shredder in this direction.
© 2010 All rights reserved. Patent pending.
1. Feed one lubricant sheet directly into shredder throat. Note: if shredder throat is extra wide,
use lubricant sheets in landscape position to cover entire feed opening to ensure complete coverage.
2. After lubricant sheet has completely passed through feed opening, run the shredder in REVERSE
for 10 seconds to complete lubrication.
*This product is carbon neutral. It meets Carbonfund.org’s CarbonFree®
Product Certication protocol which requires third-party life cycle
assessment of the product’s carbon footprint, and carbon reductions in
support of third-party validated renewable energy and reforestation
projects. To learn more, visit www.carbonfund.org/products.
Insert sheet into shredder in this direction.
© 2010 All rights reserved. Patent pending.
Insert sheet into shredder in this direction only for extra wide feed opening.
For standard width feed openings
TO ENSURE THAT ALL SHRED DER BLADES ARE E VENLY LUBRICATED,
INSERT LUBRICAN T SHEETS AS SHOWN BELOW.
For extra-wide feed openings
1. Feed one lubricant sheet directly into shredder throat. Note: if shredder throat is extra wide,
use lubricant sheets in landscape position to cover entire feed opening to ensure complete coverage.
2. After lubricant sheet has completely passed through feed opening, run the shredder in REVERSE
for 10 seconds to complete lubrication.
*This product is carbon neutral. It meets Carbonfund.org’s
CarbonFree® Product Certication protocol which requires third-party
life cycle assessment of the product’s carbon footprint, and carbon
reductions in support of third-party validated renewable energy and
reforestation projects. To learn more, visit
1. Feed one lubricant sheet directly into shredder throat. Note: if shredder throat is extra wide,
use lubricant sheets in landscape position to cover entire feed opening to ensure complete coverage.
2. After lubricant sheet has completely passed through feed opening, run the shredder in REVERSE
for 10 seconds to complete lubrication.
*This product is carbon neutral. It meets Carbonfund.org’s
CarbonFree® Product Certication protocol which requires third-party
life cycle assessment of the product’s carbon footprint, and carbon
reductions in support of third-party validated renewable energy and
reforestation projects. To learn more, visit