User Manual

3.5Fixtureinstallation

(1) As shown in picture, firstly loosen the "fixture locking device" to to make
it easier to place the fixture;
(2) Secondly, push the required fixture into the "fixture locking device" from
the right side to the limit position;
(3) Finally, tighten the "fixture locking device" to fully lock the fixture.
Fixtureinstallationsteps:
4.Operationinstructions
4.1Fixtureoffsetdetection
Please calibrate for the first-time turn on the device,as follow:
(1) On the main interface of software, click "Device Parameters".
(2) On the "Device Parameters" interface, click "Fixture offset detection".
(3) On the "Fixture offset detection" interface, select "T1 fixture"。
13 ........................................ ........................................ 14 ........................................ ........................................
GODZILLA Key Cutting Machine-Installation instructions GODZILLA Key Cutting Machine-Operation instructions
Related tools:
3mminner hexagon
spanner