User Manual

(1) As shown in picture, counterclockwise turn the "milling cutter/
probe top tightening screw"until the milling tool or probe is
loosened, and then remove it.
3.4Fixture
3.3MillingcutterandprobeDisassembly
Disassemblystepsofmillingcutterandprobe:
T1Fixture
11 ........................................ ........................................ 12 ........................................ ........................................
GODZILLA Key Cutting Machine-Installation instructions GODZILLA Key Cutting Machine-Installation instructions
Related tools:
2mminner hexagon
spanner
T2Fixture
T3Fixture