User Manual

(1) As shown above picture, firstly counterclockwise turn the "support plate locking
screw" above the support plate until removed the screw.
(2) Secondly counterclockwise turn the "support plate locking screw" below the su-
pport plate until removed the screw, and finally remove the support plate.
3.Installationinstructions
3.2Millingcutterandprobeinstallation
3.1Supportplateremoval
Supportplateremovalsteps:
Related tools:
5mminner hexagon
spanner
(1) As shown above above, firstly turn counterclockwise the "milling screw" , then
insert the milling cutter into the mounting hole of the milling cutter, push it up to
the limit, and then move it down to a certain distance (2-5mm). Finally clockwise
turn the "milling screw" until the milling cutter is locked.
(2) Refer to step 1 for the installation of the probe, and make sure that the end of the
probe is higher than the milling cutter.
Millingcutterandprobeinstallationsteps:
09 ........................................ ........................................ 10 ........................................ ........................................
GODZILLA Key Cutting Machine-Installation instructions GODZILLA Key Cutting Machine-Installation instructions
Related tools:
2mminner hexagon
spanner