User Manual

(2) Select the key type to enter the processing page.
(3) Check the relevant parameters according to the page prompts, confirm the
type of fixture and adjust the position of the fixture.
(4) Enter the known tooth profile number, click "Key Cut" after confirming.
Thesecondway
There are original car keys, keys are made by Cut By Bitting.
(1) Click "Cut By Bitting", select or enter the key
27 ........................................ ........................................ 28 ........................................ ........................................
GODZILLA Key Cutting Machine-Operation instructionsGODZILLA Key Cutting Machine-Operation instructions