User Manual

(3) 选择对齐方式, 进入下一页。
(4) 选择正确的夹具, 点击 "钥匙学习"。
(5) 获得原钥匙齿形编码, 确认无误后点击 "钥匙切割"。
哥斯拉钥匙切割机-操作说明 哥斯拉钥匙切割机-操作说明
(1) 点击 "齿形码加工", 进入钥匙胚选择界面。
使用齿形码加工根据是否有原钥匙分两种方法
4.6 齿形码加工
⽅法⼀
没有原车钥匙的情况下, 获取齿形码有以下两种途径:
1.通过专业工具获得齿数。
2.将车锁拆解, 查看锁片获得齿号。
25 ........................................ ........................................ 26 ........................................ ........................................
(4) Select the correct fixture and click "Key Learning".
(5) Obtain the original key tooth code. After confirmed correct, click "Key Cut".
(1) Click "Cut By Bitting" to enter the key embryo selection interface.
There are two ways for using Cut By Bitting according to whether the original key
is available.
4.6CutByBitting
TheFirstway
There are two ways to obtain the tooth code without the original car key:
1. Get the number of teeth with a special tools.
2. Disassemble the car lock, check the lock plate to get the tooth number.
25 ........................................ ........................................ 26 ........................................ ........................................
GODZILLA Key Cutting Machine-Operation instructionsGODZILLA Key Cutting Machine-Operation instructions