User Manual

19 ........................................ ........................................ 20 ........................................ ........................................
(3) Select "T1 Fixture" in the "fixture calibration" interface.
(4) Following the prompts, replace the T1 fixture and lock it, click "start
calibration"and wait for the calibration to complete.
(5) After the calibration is complete, click "Back".
4.3Levelingthechangedheight
(1) On the main interface of the software, click "Device Parameters".
(2) After entering the self-test page, click on "tool leveling".
GODZILLA Key Cutting Machine-Operation instructionsGODZILLA Key Cutting Machine-Operation instructions