GODZILLA Smart Key Cutting Machine USER MANUAL Please read instruction carefully before using. 1.
Disclaimer and Limitation of Liability All information and illustrations in the manual are the latestinformation. Shenzhen Changguang Technology Co., Ltd. reser ves the right to make changes without notice. Our company does not bear any direct, indirect, special, incidental damages or any indirect economic damages. Note: Before operating or maintaining the equipment, please read this manual carefully, especially the safety precautions and warnings.
CATALOGUE 1. Safety Precautions ...........................................................02 2. Product Description ......................................................... 03 2.1 Features ...................................................................... ... 03 2.2 Product Structure Diagram .................................................. 04 2.3 Product List ...................................................................... 05 2.
GODZILLA Key Cutting Machine-Safety Precautions 2. Product Description GODZILLA Key Cutting Machine-Safety Precautions 2.2 Product Structure Diagram Godzilla Key Cutter is easy to carry with super powerful and advanced Design. It is a new generation of key processing device tailored for global locksmiths. It is equipped with a 7.0-inch LCD operation screen, which is easy to operate and can be quickly and accurately copy all kinds of car keys. Handle Display screen 2.
GODZILLA Key Cutting Machine-Safety Precautions GODZILLA Key Cutting Machine-Safety Precautions 2.3 Product List Name Godzilla Key Cutter Host T1 Fixture Picture Quantity 1 1 Configuration Standard Standard Description Outside open key Fixture 1 T3 fixture (optional) 1 Optional Ford FO21Citroen SX9 fixture 1.5mm Milling cutter 1 Standard Cutting tool (φ2.5*φ6*40L) 2.5mm Milling cutter 1 Standard Cutting tool (φ2.5*φ6*40L) 1.0mmProbe 2 Standard Detection tool (φ1.
GODZILLA Key Cutting Machine-Safety Precautions GODZILLA Key Cutting Machine-Safety Precautions Input Voltage Input Voltage 100~240VAC 100~240VAC Input Frequency Input Frequency 50/60Hz 50/60Hz Maximum power Maximum power 160W 160W Spindle speed Spindle speed 12000rpm 12000rpm USB Port USB Port Micro USB Micro USB Working Temperature Working Humidity Working Humidity -20~50°C -20~50°C Godzilla host size chart 225 mm 348 mm ..................................................................
GODZILLA Key Cutting Machine-Installation instructions GODZILLA Key Cutting Machine-Installation instructions 3. Installation instructions 3.2 Milling cutter and probe installation 3.1 Support plate removal Support plate removal steps: (1) As shown above picture, firstly counterclockwise turn the "support plate locking screw" above the support plate until removed the screw.
GODZILLA Key Cutting Machine-Installation instructions GODZILLA Key Cutting Machine-Installation instructions 3.3 Milling cutter and probe Disassembly 3.4 Fixture Disassembly steps of milling cutter and probe: (1) As shown in picture, counterclockwise turn the "milling cutter/ probe top tightening screw"until the milling tool or probe is loosened, and then remove it. Related tools: 2mminner hexagon spanner T1 Fixture T2 Fixture T3 Fixture ........................................ 11 .............
GODZILLA Key Cutting Machine-Installation instructions GODZILLA Key Cutting Machine-Operation instructions 4. Operation instructions 3.5 Fixture installation Please calibrate for the first-time turn on the device,as follow: 4.
GODZILLA Key Cutting Machine-Operation instructions (4) Follow the interface prompts, replace the T1 fixture and lock it, then click "Start Inspection" to enter the calibration program. (5) After the machine steady stopped , click "return" to exit the interface and complete T1 fixture offset detection. GODZILLA Key Cutting Machine-Operation instructions (8) After the machine steady stopped , click "return" to exit the interface and complete T2 fixture offset detection.
GODZILLA Key Cutting Machine-Operation instructions GODZILLA Key Cutting Machine-Operation instructions 4.2 Leveling the changed height (1) On the main interface of the software, click "Device Parameters". (2) On the "Device Parameters" interface，click“Leveling the changed height”. (3) Follow the instructions on the interface to replace the T1 fixture and lock it.， and then click "Start" to enter the Leveling process. (4) After the machine steady stopped, you can adjust the milling cutter and the probe.
GODZILLA Key Cutting Machine-Operation instructions GODZILLA Key Cutting Machine-Operation instructions 4.3 Leveling the changed height (1) On the main interface of the software, click "Device Parameters". (2) After entering the self-test page, click on "tool leveling". ........................................ 19 ........................................ (3) Select "T1 Fixture" in the "fixture calibration" interface.
GODZILLA Key Cutting Machine-Operation instructions (6) Select "T2 fixture" in the "fixture calibration" interface and then click "T2A".
GODZILLA Key Cutting Machine-Operation instructions GODZILLA Key Cutting Machine-Operation instructions 4.5 Universal Key Copy (3) Select the model and blank key, and click to enter the processing interface. (1) Click "General Key Copy" to enter the general key copy interface. (2) Click the "Select Blank Key" button and click to go to the next page. (4) Follow the prompts to properly insert the key, and click "Key Learning". (5) Obtain the original key tooth code.
哥斯拉钥匙切割机-操作说明 GODZILLA Key Cutting Machine-Operation instructions 哥斯拉钥匙切割机-操作说明 GODZILLA Key Cutting Machine-Operation instructions 4.6 Cut By Bitting 4.6 齿形码加工 There are two ways for using Cut By Bitting according to whether the original key 使用齿形码加工根据是否有原钥匙分两种方法 is available. (3) 选择对齐方式, 进入下一页。 (4) 选择正确的夹具, 点击 and "钥匙学习"。 (4) Select the correct fixture click "Key Learning". (5) the original key tooth code. After confirmed correct, click "Key Cut".
GODZILLA Key Cutting Machine-Operation instructions (2) Select the key type to enter the processing page. GODZILLA Key Cutting Machine-Operation instructions The second way There are original car keys, keys are made by Cut By Bitting. (1) Click "Cut By Bitting", select or enter the key (3) Check the relevant parameters according to the page prompts, confirm the type of fixture and adjust the position of the fixture. (4) Enter the known tooth profile number, click "Key Cut" after confirming. .........
GODZILLA Key Cutting Machine-Operation instructions GODZILLA Key Cutting Machine-Operation instructions 4.7 All Key Lost Query (2) Select the key type and click to enter the processing interface. (1) Click "All Key Lost Quer y" to enter the vehicle brand selection interface. (3) Click "Key Learning" to get the original key tooth shape. (4) After confirming, click "Key cutting". (2) Click on the selected vehicle brand, enter the key tooth code, and click "Quer y". ......................................
GODZILLA Key Cutting Machine-Operation instructions GODZILLA Key Cutting Machine-Operation instructions 4.8 Missing Tooth Query (3) Select the key serial number from the list and click to enter the processing page. (1) Click "missing quer y" to enter the vehicle brand or model selection interface. (2) Select or enter the vehicle brand or model and click to enter. (4) The tooth code will be generated automatically. (5) After confirming no error, click "Key Cutting" to start processing.
GODZILLA Key Cutting Machine-Operation instructions GODZILLA Key Cutting Machine-Online upgrade 5. Online upgrade 5.1 Wi-Fi connection (4) Enter the known tooth shape code. If the tooth shape code is not clear, enter "?" directly, and click "missing tooth quer y" after input.According to the system calculated tooth shape to code and process ........................................ 33 ........................................
GODZILLA Key Cutting Machine-Online upgrade GODZILLA Key Cutting Machine-Online upgrade 5.2 Software online upgrade (1) On the main interface, click " Version Update". (2) If the ser ver version need update, the text will turn red, if not, it is the latest version. (4) If prompted as above shown when updated fails, you can update again after restarting. (3) Click "APP Update" and click "Yes" in the pop-up dialog box to download and install the latest version. ........................................
GODZILLA Key Cutting Machine-Online upgrade 5.3 Firmware upgrade online (1) On the main interface, click "Update Version". (2) If the ser ver version update, the text will turn red, if not, it is the latest version. (3) Click "Firmware Update" and click "Yes" in the pop-up dialog box to download and install the latest version. (4) After completed upgrade the firmware, restarts the machine to apply the update. GODZILLA Key Cutting Machine-Maintenance 6. Maintenance 6.
GODZILLA Key Cutting Machine-Warranty 7. Warranty Shenzhen Changguang Technology Co., Ltd. (hereinafter referred to as the " Company") promises to be the original retail buyer of this product, within one year from the date of deliver y (if there is no transaction certificate, the factor y date recorded in the company shall prevail), if Under normal use conditions, the product or accessor y has defects in technology or materials that cause the equipment to fail.
