锂电机顶闪光灯 TTL Pioneering TTL Li-ion Camera Flash For Canon INSTRUCTION MANUAL 说 明 手 册 中英文双语 / Chinese English Bilingual 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong 在使用本产品之前： Town, Baoan District, Shenzhen 518103, China 请先仔细阅读本手册，以确保您能安全使用。请保存好本手册以备将 电话/Tel: +86-755-29609320(8062) 来查询参考。 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.
固件升级 Foreword 本机通过USB插座可进行固件升级。软件最新公告及说明将会发布在 官方网站上。 注：本品出厂不配USB升级线，请另行购买。普通的USB线可 使用，本产品USB口为Micro USB 接口。 Thank you for purchasing this product. This V860IIC camera flash applies to Canon EOS series cameras and is compatible with E-TTL II autoflash. With this E-TTL II compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments. This camera flash features: ● GN60 (m ISO 100, @200mm). 22 steps from 1/1 to 1/128.
Contents 49 Battery 50 Attaching to a Camera 50 Power Management 51 Flash Mode — E-TTL Autoflash FEC (Flash Exposure Compensation) FEB (Flash Exposure Bracketing) FEL: Flash Exposure Lock High-Speed Sync Second-Curtain Sync Pioneering Li-ion Camera Flash 54 M: Manual Flash 55 Multi: Stroboscopic Flash 56 Wireless Flash Shooting: Radio (2.
● LCD Panel Name of Parts (1)E-TTL Autoflash Zoom : zoom display (Page 76) Focus length (Page 76) : High-speed sync : Automatic (Page 53) : Manual(Page 54) : Second curtain ETTL : E-TTL II 09 01 sync (Page 53) autoflash 02 03 11 : Master unit 10 : Master unit flash ON F : Aperture (Page 51) Distance indicator display flash OFF : Flash exposure 04 06 05 12 13 07 compensation (Page 51) Flash exposure compensation amount Effective flash range (Page 51) Flash exposure bracketing seque
(4) Radio Transmission Shooting/Optic Transmission Shooting ● 2.4G Radio Transmission: As a Master Unit ● Master Unit Flash mode Gr : Group flash (radio transmission) : Master : Radio transmission wireless shooting RATIO : Flash ratio : Optic transmission wireless shooting ● 2.4G Radio Transmission: As a Slave Unit : Master unit flash ON : Master unit flash OFF Firing group Channel ● Slave Unit ● What’s in the Box of V860IIC Kit? 1. Flash Unit : Slave : Slave icon 2. Li-ion Battery Pack 4.
● Separately Sold Accessories 3 The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1C TTL wireless flash trigger, FT-16S power & trigger control, Mini To unload the battery, tap the white knob and the battery pack will pop out. Then close the compartment. softbox, White & Silver reflector, Honeycomb, Color gels, Snoot, etc. ● Battery Level Indication Make sure the battery pack is securely loaded in the flash.
C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-APO, Page 77) C.Fn Slave Auto Power Off Timer is set to 60 minutes by default. Another option “30 minutes” is available. (C.FnSv APOT, Page 77) FEB: Flash Exposure Bracketing You can take three flash shots while automatically changing the flash output for each shot from -3 to +3 in 1/3rd stops.
● If the subject is too far away and underexposure, the < > icon will blink in the viewfinder. Move closer to the subject and try the FE lock again. ● If is not displayed on the LCD panel, FE lock cannot be set. M: Manual Flash The flash output is adjustable from 1/1 full power to 1/128th power in 1/3rd stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. ● If the subject is too small, FE lock might not be very effective.
Maximum Stroboscopic Flashes: Multi: Stroboscopic Flash With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. 1 2 Hz Flash output Press button so that < MULTI > is displayed. Turn the Select Dial to choose a desired flash output.
Positioning and Operation Range (Example of wireless flash shooting) ● Shooting with a Different Flash Mode set for Each Group ● Autoflash Shooting with One Slave Unit Auto external flash metering Ceiling E A D B Transmission distance is about 100m. E-TTL II Manual flash C Manual flash Manual flash ● Use the supplied mini stand to position the slave unit. ● Before shooting, perform a test flash and test shooting.
1. Wireless Settings 3. Setting the Communication Channel You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless setting to OFF. If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same.
5 Set the master unit’s flash mode to . ● Set the master unit’s flash mode to . ● For shooting, will automatically be set for the slave unit. ● Set the master unit flash firing as ON to fire a flash. 6 Check that the flash is ready. ● Check that the master flash ready indicator is lightened. ● When the slave flash ready indicator is ready, the AFassist beam lighting area will blinks at 1 second intervals.
4 Setting flash ratio. ● Press Function Button 3 < Gr >. ● Turn the Select Dial to set the amount of flash ratio and press button to confirm. 5 Auto Flash Shooting with Three Slave Unit 1 to 1:3 (1/2 step increment). ● The details of the flash ratio settings are as follows. 8:1 4:1 5.6:1 2:1 2.8:1 1.4:1 2 1 2 Setting the slave group . 1:8 1:5.6 Setting the flash mode to . Setting the number of flash groups.
7. Multi: Wireless Flash Shooting with Manual Flash 3 Set the flash mode ● Set the flash mode of each firing group by operating the master unit. Setting stroboscopic flash. ● While < ● Press button so that MENU1 > is displayed, press Function Button 3 < Gr > and turn the Select Dial to choose the group. is displayed. ● Setting the stroboscopic flash. (Page 55) ● Press Function Button 2 < MODE > and select the flash mode of the selected group from , 8.
Wireless Flash Shooting: Optic Transmission 2. Master Unit’s Flash OFF This product supports wireless flash application and functions as either a master or a slave unit. As a master unit, it can control Canon speedlites e.g. 580EXII, 600EX-RT via wireless. As a slave unit, it can receive wireless signals of Canon speedlites e.g. 580EXII, 600EX-RT and commanders of Canon cameras e.g. 7D/60D/600D. You can set up two to three slave groups for E-TTL II autoflash shooting.
2 Slave Unit Setting Using Automatic Wireless Flash with Multiple Slave Units ● Set the other camera flash When stronger flash output or more convenient lighting operation is needed, increase the number of slave units and set it as a single slave unit. To add slave units, use the same steps as setting “automatic wireless flash with a single slave unit”. Any flash group can be set (A/B/C).
5. ETTL: Use the Wireless Shooting of Flash Ratio Auto Flash Shooting with Three Slave Unit 1 Auto Flash Shooting with Two Slave Unit Divide the slave units into A and B groups and balance their shooting illumination (flash ratio). Auto control exposure to make the total output of A and B flash groups up to standard exposure. 1 Setting the flash groups of slave unit. C Setting the slave group . ● Use the same method of A step 1 (Page 71) to set the slave unit of flash group.
2 Setting the number of flash groups. ● When < MENU1 displayed, press the Function Button 2 < RATIO > to set the groups to fire. ● The setting changes as follows each time you press the button: ALL(RATIO OFF)→ A/B(RATIO A:B)→ A/B/C(RATIO A:B:C) 3 Setting flash output. ● Press Function Button 3 < Gr >. Turn the Select Dial to set the flash output of the groups. Press button to confirm.
Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. To set the bounce direction, hold the flash head and turn it to a satisfying angle. -7-90 360 ZOOM: Setting the Flash Coverage and Using the Wide Panel The flash coverage can be set automatically or manually.
C.Fn: Setting Custom Functions Control with the Camera’s Menu Screen The following table lists the available and unavailable custom functions of this flash. C.Fn Custom Functions Custom Function Signs m/ft APO FEB ACL Function Distance indicator Auto power off FEB auto cancel FEB FEB order AF AF-assist beam Setting No. Settings & Description Custom Functions No. m m C.Fn-00 ft feet ON ON OFF OFF ON ON OFF OFF 0 → − → + C.Fn-01 C.
Troubleshooting If there is a problem, refer to this Troubleshooting Guide. Firmware Upgrade This flash supports firmware upgrade through the USB port. Update information will be released on our official website. The Camera Flash does not fire. USB connection line is not included in this product. The USB ● The camera flash is not attached securely to the camera. port is a standard Micro USB socket. Common USB →Attach the camera’s mounting foot securely to the camera. connection line is applicable.
