User Manual

ManualsBrandsGodox ManualsFlashes & On Camera LightingV1 Flash for FUJIFILM

Flash Mode—TTL Autoflash

This flash has three flash modes: TTL, Manual (M), and Multi

(Stroboscopic). In TTL mode, the camera and the flash will work

together to calculate the correct exposure for the subject and the

background. In this mode, multiple TTL functions are available:

FEC, HSS, second curtain sync, modeling flash, control with the

camera’s menu screen.

TTL Mode

● Press the camera release button halfway to focus. The aperture

and effective flash range will be displayed in the viewfinder.

* Press < MODE > Mode Selection Button and three flash modes

will display on the LCD panel one by one with each pressing.

Press < MODE > Mode Selection Button to enter TTL mode. The

LCD panel will display.

● When the shutter button is fully pressed, the flash will fire a pre-

flash that the camera will use to calculate exposure and flash

output the instant before the photo is taken.

With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.

It is useful in situations where minor adjusting of the TTL system is

needed based on the environment.

Setting FEC:

　　 FEC: Flash Exposure Compensation

Set the flash exposure

2 compensation amount.

● “0.3”means 1/3 step,

“0.7”means 2/3 step.

● Turn the Select Dial to set

the amount.

● To cancel the flash

exposure compensation,

set the amount to “+0”.

Press Set Button again to

3 confirm the setting.

Press Function Button 2

1 Press the <+/-> button. The

icon < > and flash

exposure compensation

amount will be highlighted on

the LCD panel.

C.Fn

Disabling Auto Power Off function is recommended when

the flash is used off camera. (C.Fn-STBY, Page 52)

Slave Auto Power Off Timer is set to 60 minutes by

default. Another option “30 minutes” is available. (C.Fn-

Sv STBY, Page 52)

- 39 - - 40 -

High-Speed Sync

High Speed Sync (Hss flash) enables the flash to synchronize with

all camera shutter speeds. This is convenient when you want to use

aperture priority for fill-flash portraits.

● Setting the flash to High-speed Sync mode when it is on the camera:

Use the Flash Setting ＞ Flash Light Function Setting on the

camera’s shooting menu to adjust settings of the flash light. More

details please refer to camera’s instruction menu.

● When choosing FP on the “SYNC” setting, it means the

high-speed sync function is turned on.

SYNC.MODE

TTL

±0

-5.0 +5.0

TTL MODE TTL

ZOOM

M 16mm

LED AF

SYNC.

ANGLE

BACK

ADJUST

END

SHOEMOUNTFLASH

● With high-speed sync, the faster the shutter speed, the

shorter the effective flash range.

● Multi flash mode cannot be set in high-speed sync mode.

● Over-temperature protection may be activated after 15

consecutive high-speed sync flashes.

With a slow shutter speed, you can create a light train following the

subject. The flash fires right before the shutter closes.

Second-Curtain Sync

● Setting second-curtain sync:

Use the Flash Setting ＞Flash Light Function Setting on the