TTL锂电圆头机顶闪光灯 TTL Li-ion Round Head Camera Flash INSTRUCTION MANUAL 说明手册 深圳市神牛摄影器材有限公司 在使用本产品之前: GODOX Photo Equipment Co., Ltd. 请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将 来查询参考。 Before using this product: Please read this user manual carefully in order to ensure your safety 705-V1F000-00 Made In China and the proper operation of this product. Keep for future reference.
Foreword Warning Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This V1F camera flash applies to FUJIFILM series cameras and is compatible with TTL autoflash. With this TTL compatible flash, your Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center. shooting will become simpler. You can easily achieve a correct flash Keep out of reach of children.
Contents 29 Foreword 30 Warning 33 Name of Parts Body Control Panel Dot-matrix LCD Panel LCD Panel in Three Modes What's in the Box of V1F Kit? Separately Sold Accessories 37 Battery 38 LED Modeling Lamp 38 Attaching to a Camera 38 Power Management 39 Flash Mode — TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync 41 M: Manual Flash 42 Multi: Stroboscopic Flash 43 Wireless Flash Shooting: Radio (2.
● LCD Panel Name of Parts (1)TTL Autoflash Zoom : zoom display (Page 51) : Automatic Focus length (Page 51) : Manual(Page 41) TTL : TTL autoflash : High-speed sync (Page 40) 01 09 02 Distance indicator display 10 04 03 11 05 06 07 Flash exposure compensation amount ● The display will only show the settings currently applied. 08 ● The functions displayed above function buttons 1 to 4, such ● Body as 01. Flash Head 07. Battery Remove Button 02. LED Modeling Lamp(01~10) 08. Hotshoe 03.
● What’s in the Box of V1F Kit? (4) Radio Transmission Shooting ● Master Unit Flash mode 1. Flash Unit 2. Lithium Battery 3. USB Battery Charger 4. USB Cable 5. Charger 6. Mini Stand 7. Protection Case 8.
Battery LED Modeling Lamp ● Features 1. This flash unit uses Li-ion battery which has long runtime. The available charge-and-discharge times are 500. 2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit. 3. Take only 3.5 hours to fully charge the battery by using the standard battery charger. Press the Modeling Lamp Setting button to set the modeling lamp. Short press the Set Button to turn on or off the modeling lamp.
C.Fn Disabling Auto Power Off function is recommended when the flash is used off camera. (C.Fn-STBY, Page 52) C.Fn Slave Auto Power Off Timer is set to 60 minutes by High-Speed Sync High Speed Sync (Hss flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. default. Another option “30 minutes” is available. (C.
M: Manual Flash Multi: Stroboscopic Flash The flash output is adjustable from 1/1 full power to 1/256th power in 1/10th stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. 1 Press < MODE > button so that < M > is displayed. With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec.
Maximum Stroboscopic Flashes: Flash output Hz 1 2 3 4 5 6-7 8-9 1/4 8 6 4 3 3 2 2 1/8 14 14 12 10 8 6 5 1/16 30 30 30 20 20 20 10 1/32 60 60 60 50 50 40 30 1/64 90 90 90 80 80 70 60 1/128 90 90 90 90 90 90 80 1/256 90 90 90 90 90 90 80 10 20-50 60-100 1/4 2 2 2 Flash output Hz 1/8 4 4 4 1/16 8 8 8 1/32 20 16 12 1/64 50 30 20 1/128 70 40 40 1/256 70 40 40 Positioning and Operation Range (Example of wireless flas
1. Wireless Settings 4. Wireless ID Settings You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless setting to OFF. Change the wireless channels and wireless ID to avoid interference for it can only be triggered after the wireless IDs and channels of the master unit and the slave unit are set to the same.Press the
2 Slave Unit Setting Using Automatic Wireless Flash with Multiple Slave Units ● Set the other camera flash When stronger flash output or more convenient lighting operation is needed, increase the number of slave units and set it as a single slave unit. To add slave units, use the same steps as setting “automatic wireless flash with a single slave unit”. Any flash group can be set (A/B/C/D/E).
7. M: Wireless Flash Shooting with Manual Flash This describes wireless (multiple shooting) using manual flash. You can shoot with a different flash output setting for each slave unit (firing group). Set all parameters on the master unit. 1 Other Applications Sync Triggering Setting the flash mode to . The Sync Cord Jack is a Φ2.5mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter. Setting flash output.
Bounce Flash By pointing the flash head toward a wall or ceiling, the flash will bounce off the surface before illuminating the subject. This can soften shadows behind the subject for a more natural-looking shot. This is called bounce flash. To set the bounce direction, hold the flash head and turn it to a satisfying angle. -7-120° 330° C.Fn: Setting Custom Functions The following table lists the available and unavailable custom functions of this flash. C.
Technical Data Protection Function 1. Over-Temperature Protection Model ● To avoid overheating and deteriorating the flash head, do not fire Compatible Cameras FUJIFILM cameras (TTL autoflash) Power 76Ws more than 30 continuous flashes in fast succession at 1/1 full power. After 30 continuous flashes, allow a rest time of at least 10 minutes. (1/1 output) Flash Coverage ● If you fire more than 30 continuous flashes and then fire more is shown on the LCD display.
Firmware Upgrade Troubleshooting If there is a problem, refer to this Troubleshooting Guide. ● The USB port is a Type-C USB socket. Type-C USB connection The Camera Flash does not fire. ● As the firmware upgrade needs the support of Godox G3 line is applicable. ● The camera flash is not attached securely to the camera. software, please download and install the "Godox G3 firmware →Attach the camera’s mounting foot securely to the camera. upgrade software" before upgrading.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.