Operation Manual

Flash Output
1/1
1/2
1/4
1/8
1/16
1/32
1/64
1/128
Flash Coverage (mm)
14
15/
49.2
10.6/
34.8
7.5/
24.6
5.3/
17.4
3.8/
12.5
2.7/
8.9
1.9/
6.2
1.3/
4.3
24
28/
91.9
19.8/
65
14/
45.9
9.9/
32.5
7/
23
4.9/
16.1
3.5/
11.5
2.5/
8.2
28
30/
98.4
21.2/
69.6
15/
49.2
10.6/
34.8
7.5/
24.6
5.3/
17.4
3.8/
12.5
2.7/
8.9
35
39/
127.9
27.6/
90.7
19.5/
64
13.7/
45.2
9.7/
32
6.9/
22.7
4.9/
16
3.5/
11.4
50
42/
137.8
29.7/
97.4
21/
68.9
14.8./
48.6
10.5/
34.4
7.4/
24.3
5.3/
17.4
3.7/
12.1
70
50/
164
35.4/
116.1
25/
82
17.7/
58.1
12.5/
41
8.8/
28.9
6.3/
20.7
4.4/
14.4
80
53/
173.9
37.5/
123
26.5/
86.9
18.7/
61.4
13.3/
43.6
9.4/
30.8
6.6/
21.7
4.7/
15.4
105
58/
190.3
41/
134.5
29/
95.1
20.5/
67.3
14.5/
47.6
10.3/
33.8
7.3/
24
5.1/
16.7
Manual Flash
13
14
Protection Function
1.Over-Temperature Protection
• To avoid overheating and deteriorating the flash head, do not fire
more than 20 continuous flashes in fast succession at 1/1 full
power. After 20 continuous flashes, allow a rest time of at least 10
minutes.
• If you fire more than 20 continuous flashes and then fire more
flashes in short intervals, the inner over-temperature protection
function may be activated and make the recycling time about 10
to 15 seconds. If this occurs, allow a rest time of about 10
minutes, and the flash unit will then return to normal.
2.Other Protections
• The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
LCD Panel
E1
E2
E3
Meaning
A failure occurs on the recycling system so that the flash
cannot fire.
Please restart the flash unit. If the problem still exists,
please send this product to a maintenance center.
The system gets excessive heat. Please allow a rest time
of 10 minutes.
The voltage on two outlets of the flash tube is too high.
Please send this product to a maintenance center.
• Flash Recycling (with size-AA alkaline batteries)
Recycling time
Flash-ready indicator
Normal flash: approx. 0.1-5sec.
Red indicator lights
Specifications----------------------------------------------------13
Troubleshooting Guide-------------------------------------------15
Compatible Camera Models-------------------------------------16
Reference
Specifications
• Type
Compatible cameras
Guide No.
Flash coverage
Flash duration
Nikon DSLR cameras (i-TTL autoflash)
58/190(at 105mm focal length, ISO 100 in meters/feet)
24-105mm (14mm with wide panel)
•Auto zoom (Flash coverage set automatically to
match the lens focal length and image size)
•Manual zoom
•Swinging/titling flash head, 0-270°horizontally and
-7-90°vertically (Bounce Flash)
1.2ms or shorter
• Exposure Control
Exposure control system
Flash Exposure
Compensation (FEC)
FV lock:
Sync mode:
Stroboscopic flash:
Optic slave triggering
i-TTL autoflash, manual flash
Manual. ±3 steps in 1/3 step increments
<FV> button
High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Provided (1 - 90 Hz)
Provided (S1 & S2)
105
58/
190.3
Normal Flash (Full Output)
Flash Coverage (mm)
Normal Flash
(Full output)
14
15/
49.2
24
28/
91.9
28
30/
98.4
35
39/
127.9
50
42/
137.8
70
50/
164
80
53/
173.9
• AF-Assist Beam
Effective range (approx.)
0.7-6m/2.3-20 feet
• Power Source
Internal power
Battery life
(approx. flash count)
Power saving
External power
4 size-AA alkaline batteries
*Size-AA Ni-MH and lithium batteries also usable
100-700 flashes (with size-AA alkaline batteries)
Power off after certain period (approx. 1.5 min.)
of idle operation
Canon battery pack CP-E4
GODOX power pack PB960, PB820, FB2000, and CP-80
• Color Temperature
5600±200k
• Dimensions
(W x H x D)
83×154×112 mm/ 3.3×6.1×4.4 in.
• Weight (approx.)
395g / 13.9 oz. (camera flash only, excluding batteries)
Product specifications and external appearance are subject to change
without notice.
• Guide No. (at ISO 100, in meters/feet)